Laserfiche WebLink
Application for the conditional use permit shall be made in writing to the Council on such form <br />as the Council may from time to time designate, and shall include the following information: <br /> <br /> a. Names and address of the applicant, operator and owner of the land. <br /> <br /> b. The purpose of the permit. <br /> <br /> c. The exact legal description and acreage of the property to be graded, mined <br /> or filled. <br /> <br /> d. The following maps of the entire work site and including all areas within <br /> 350 feet of the work site. All maps shall be drawn at a scale of 1 inch to 100 <br /> feet unless otherwise stated below: <br /> <br /> 1. Map 1 - Existing work site conditions to include: <br /> <br /> (a) contour map (2 foot intervals); <br /> <br /> (b) existing vegetation; <br /> <br /> (c) existing drainage and permanent water areas; <br /> (d) existing structures; and <br /> (e) existing wells. <br /> <br /> (f) water table elevations. <br /> <br /> 2. Map 2 - Proposed operations to include: <br /> <br /> (a) location of work sites to be graded, mined or filled showing <br /> elevations of each stage of proposed operations; <br /> <br /> (b) location of storage of mined materials, showing maximum height <br /> of storage deposits; <br /> <br /> (c) location of vehicle parking, and access roads; <br /> <br /> (d) location and description of erosion and sediment control <br /> structures; <br /> <br /> (e) location of any proposed dewatering operations. <br /> 3. Map 3 - End Use Plan to include: <br /> (a) <br /> <br />(b) <br /> <br />(c) <br /> <br />final grade of proposed work site showing elevations and contour <br />lines at two foot intervals; <br /> <br />location and species of vegetation to be planted; <br /> <br />phasing plan; and <br /> 17 <br /> <br /> <br />