Laserfiche WebLink
STATION FEATURE CODES <br />FEATURE NAME COD~ <br />Handsfree On/Off. 319 <br /> <br />DEFINITION <br /> <br />(Keysets Only) Disables/enables the keyset's handsfree <br />intercom answering. Incoming intercom calls ring as <br />private calls if handsfree answering is disabled. <br /> <br />Headset Enable 315 <br />Headset Disable 316 <br />Headset On/Off 317 <br /> <br />Hold - Individual 336 <br /> <br />Hold - System 335 <br /> <br />Hunt Group Remove <br />Hunt Group Replace <br />Hunt Group Remove/Replace <br /> <br />Message <br /> <br />Message - Cancel <br /> <br />Message - Cancel Current <br /> <br />Message - Silent <br /> <br />322 <br />323 <br />324 <br /> <br />365 <br /> <br />366 <br /> <br />368 <br /> <br />367 <br /> <br />(Keysets Only)The enable code signals the system that <br />a headset has been connected to the keyset. The <br />disable code ret0ms the keyset to normal operation. <br />The on/off feature code can be used to toggle the <br />feature on or off. <br /> <br />Places a call on hold so that it can be picked up directly <br />at that station or through a reverse transfer from any <br />other station. (Keysets user the HOLD key). <br /> <br />Places an outside call on system hold. It can be picked <br />up directly at any keyset that has an individual trunk key <br />and has allowed-answer and/or outgoing access for that <br />trunk, or by the station that placed it on hold. (If used on <br />conference or intercom calls, the system places the call <br />on individual hold.) <br /> <br />Removes the station from its assigned hunt group(s) or <br />places it in again. Does not affect the non-hunt group <br />calls. The remove/replace feature code can be used to <br />toggle the feature. <br /> <br />This feature code is used for leaving and retrieving a <br />message waiting indication at a called station or the <br />called station's message center. Depending on how the <br />message was left, the called station user either retrieves <br />the message from his/her message center or from the <br />station that left the message. (Keysets use the MSG <br />key.) <br /> <br />Allows the station user to cancel a message waiting <br />indication that he or she left at another station. <br /> <br />Cancels a message waiting indication that is waiting at <br />the station without requiring the user to respond to it. <br />(Keysets can use the astedsk [*] key while viewing the <br />message.) <br /> <br />Leaves a message waiting indication at a station without <br />first placing an intercom call. (This is the code that <br />should be used by analog voice mail units connected to <br />the AXXESS System.) <br /> <br />-220- <br /> <br />Page 1.11 <br /> <br />I <br />m' <br />I <br />m <br />m <br />m <br /> <br /> i <br /> i <br /> m' <br /> m <br /> 1 <br /> <br /> I <br /> <br /> <br />