Ordinance - #11-05 - 04/12/2011 - Laserfiche WebLink

Home

a. In the COR -I subdistrict, one story restaurants are allowed when the facade cornice height is a minimum of 22 feet in height. b. In the COR -2 subdistrict, accessory gas uses are allowed under the following conditions: 1. Gas operations that are accessory to a permitted principal use. 2. Gas and convenience item sales shall not comprise more than 25 percent of the gross receipts of the principal use business. 3. Payment for sale of gas must be paid at the pump or inside the principal building. No accessory structures are allowed as part of the gas operations. 4. No more than five percent of the square footage of the principal use building may be dedicated for the gas operations and convenience item sales. 5. No franchise food operations can be contained in the area designated within the principal building for gas operation and convenience item sales 6. Gas operations located in the side or rear of the principal use building. 7. Gas operations are located within 100 feet of principal use building 8. Gas islands and canopy are architecturally harmonious and contain the same exterior building materials as the principal use building. 9. Gas operations shall constitute no more than four islands with a limit of eight individual dispensers. 10. Gas operations that are located in the city's wellhead protection area must meet the following standards: (1) Double walled storage tanks with corrosion protection. (ii) Spill protection to catch spills that may occur during delivery of products. (iii)Overfill protection including automatic shutoff devices, overfill alarms and ball float valves or approved equal. (iv) Leak detection, including interstitial monitoring of the double walled tank. (v) Product release monitoring, including installation of groundwater monitoring wells and monthly monitoring of these wells will be required only after a reportable leak or spill has been detected. (vi) Tank tightness testing on an annual basis. (vii) Annual reports summarizing monthly monitoring results, monthly inventory control, and tank tightness testing. (2) Development standards.