Agenda - Council Work Session - 11/15/2011

Home

b. State Highway c. DNR Development Review Manual (September 2011) Plat /Subdivision Review Page 9 of 45 (1 11 x 17 PDF —or- 7 full size) (1 full size, 1 11 x 17) 5. No grading shall proceed until the final plat has been received and approved by the City Council and the Developer has obtained all permits required by other regulatory agencies. Sketch Plan Requirements: The Sketch Plan will be reviewed by the Planning Commission. The Application for Sketch Plan Review must be submitted no less than 30 days prior to the next available Planning Commission Meeting. 1. Name of subdivision, which name shall not duplicate any plat already recorded in Anoka County. 2. Full Legal description of the land involved in said plat. 3. Names and addresses of the owner and subdivider of the land, and the designer and surveyor of said plat. 4. Graphic scale of not more than one inch to 100 feet. 5. Date and north point. 6. Boundary line survey, including measured distances and angles, which shall be tied into the nearest quarter section or section line by traverse and certified by a registered land surveyor. 7. Total acreage and square feet of project area. 8. Location and names of existing or platted streets and other public ways, parks and public open spaces, permanent buildings and structures, easements and section and municipal boundary lines within the plat and to a distance of 100 feet beyond. 9. Identify all wetlands on the property. 10. Locations and widths of public right -of -way, public and private streets and pedestrian trails and sidewalks. 11. Other areas intended to be dedicated or reserved for public use, including the size of such areas. 12. If residential, state type, number of dwelling units, and approximate net density (excluding major road right -of -ways and wetlands). 13. Additional information as requested by Staff.