04/12/94 - Laserfiche WebLink

Home

qRKHIJRD The sheets will be laid out in north/south oriented legal half-section areas with a small overlap between sheets. The overall sheet size will be __.+ 20" x 30". There will be a total of 19 sheets in this format. Map Accuracy and Liability By accepting this proposal, you agree the work described herein will meet your intended purpose. The use of this map for a purpose other than that which is originally designed may render the map unreliable. Except where the ground may be obscured, map accuracy will comply with National Map Accuracy Standards. Briefly, these state that 90 % of all well defined features shall be correct within 1/30 inch, and 90% of all elevations correct within l/2-contour interval. If areas are obscured, contours will be dashed to indicate they are approximate. The accuracy standards should be applied only to the basic scale and contour interval I" = 200', 2' C.I. for which the maps were designed. MARKHURD's liability, in the production or use of these maps, for any inaccuracies that may be found in these maps, shall be limited to the correction of such inaccuracies, and shall not exceed the contract value of the maps. No representations or warranties are made other than those stated herein, j Performance Schedule MARKHURD will obtain new aerial photography during the coming spring, 1994 photo' season as soon after notice to proceed as ground and weather conditions permit. MARKHURD will furnish you the aerial contact prints within 15 working days of completion of photographic operations. The field control work will be completed within 25-30 working days upon completion of the aerial overflight: The time required to furnish the completed maps will depend to some extent upon our workload at the time notice to proceed is furnished. 'We would, however, normally expect the final ortho sheets will be delivered within 20 Working days after our receipt of completed ground control information. /&