Laserfiche WebLink
1231 <br />1232 <br />1233 <br />1234 <br />1235 <br />1236 <br />1237 <br />1238 <br />1239 <br />1240 <br />1241 <br />1242 <br />1243 <br />1244 <br />1245 <br />1246 <br />1247 <br />1248 <br />1249 <br />1250 <br />1251 <br />1252 <br />1253 <br />1254 <br />1255 <br />1256 <br />1257 <br />1258 <br />1259 <br />1260 <br />1261 <br />1262 <br />1263 <br />1264 <br />1265 <br />1266 <br />1267 <br />1268 <br />1269 <br />1270 <br />than required by Minn. Rules ch. 7080 for design of on -site sewage <br />treatment systems, shall be considered nonconforming. <br />(Code 1978, § 9.25.06. Ord ' <br />( ) <br />Planned Unit Developments (PUDs) <br />(1) Types of PUDs permissible. Planned unit developments (PUDs) are allowed <br />for new projects on undeveloped land, redevelopment of previously built <br />sites, or conversions of existing buildings and land. The land use districts in <br />which they are an allowable use are identified in the land use district <br />descriptions in this subdivision and the official zoning map. <br />(2) Processing of PUDs. Planned unit developments must be processed as a <br />conditional use, except that an expansion to an existing commercial PUD <br />involving six or less new dwelling units or sites since the adoption date of the <br />ordinance from which this subdivision is derived is permissible as a permitted <br />use provided the total project density does not exceed the allowable densities <br />calculated in the project density evaluation procedures. Approval cannot <br />occur until the environmental review process (EAW/EIS) is complete. <br />(3) <br />Application for a PUD. The applicant for a PUD must submit the following <br />documents prior to final action being taken on the application request: <br />a. A site plan and/or plat for the project showing locations of property <br />boundaries, surface water features, existing and proposed structures <br />and other facilities, land alterations, sewage treatment and water <br />supply systems (where public systems will not be provided), and <br />topographic contours at ten -foot intervals or less. When a PUD is a <br />combined commercial and residential development, the site plan <br />and/or plat must indicate and distinguish which buildings and portions <br />of the project are residential, commercial, or a combination of the two. <br />b. A property owncroowner's association agreement (for residential <br />PUDs) with mandatory membership, and all in accordance with the <br />requirements of this subdivision. <br />c. Deed restrictions, covenants, permanent easements or other <br />instruments that: <br />1. Properly address future vegetative and topographic <br />alterations, construction of additional buildings, beaching of <br />watercraft, and construction of commercial buildings in residential <br />PUDs; and <br />34 <br />Formatted: Font: (Default) +Body (Calibri), 11 <br />pt, Not Bold, Strikethrough, Border: : (No <br />border) <br />