04/18/89 Special - Laserfiche WebLink

Home

~ An As-Built drawlng shall be provided to the City sho~lng the location of the conductors between the breaker cabinet and the pole or poles; these drawings shall be provided to the City by the contractor prior to the Clty accepting the street lights. 5. ~ All conductors, sultable for direct burial, will be type USE, copper cable with ground. 6. Grounding: At the breaker cabinet and at the end of each distribution circuit there must be Installed a driven ground as r~ulred by National Electric Code Article t250-84. B. Any distrlbutlon clrcuit over 300 feet In length must have a driven ground rod at mldpolnt. C. Ground wire must be Insulated wlre suitable for direct burial. For 120 volt clrcults all conductors will be brought up the pole and connections will be made at the fixture. Re ground wire wlll be connected to the grounding lug If provided. If there is no grounding lug, the fixture shall be grounded to the mast arm. Where more than one llght ls In I~ne, a splice will be made above grade in the J unctlon box. Junction box shall be placed on the pole approximately 1' above ground level. Splicing shall be done in the Junc~rion box and a in-the-line fuse shall be installed. 8. Photo Control: Photo control is to be faced as nearly north as practical. 9. Locks.' One-shot, loop-type locks are to be placed at each feed point by the electrical contractor. 10. Completlon: When street lighting Is completed by the Contractor, he shall contact the Electrical Inspectcr for Inspection (Eugene Boyle, 755-1499 ~ne electrical con~ractor shall forward approved copy (blue? of electrical Inspectlon to the Ci~/ of Anoka or NSP. ~-ne City of Anoka or NSP shall energize ~ne lights and notify the City of addresses and date energlzed. Flnat acceptance is not made untll As-Bullts and 5 blue-line copies have been submitted to the City Engineer by the Contractor.