05/02/89 - Laserfiche WebLink

Home

Z~_BdJ]~L An As-Bullt drawlng shall be provlded to the City shc~lng the location of the conductors between the breaker cablnet and the pole or poles; these drawings shall be provided to the City by the contractor prlor to the City acceptlng the street lights. 5. ~ All conductors, suitable for direct burial, will be type USE, copper cabie with ground. 6. Grounding: At the breaker cabinet and at the end of each distribution circuit there must be installed a drlven ground as required by National Electric Code Article IZ50-84. B. Any dlstrlbution clrcult over 300 feet In length must have a driven ground rod at mldpolnt. C. Ground wire must be insulated wire suitable for direct burial. Ae For 120 volt circuits all conductors will be brought up the pole and connections will be made at the fixture. Re ground wlre wlll be connected to the grounding lug if provided. If there is no grounding lug, the flxture shall be grounded to the mast arm. Be Where more t~aan one light is In line, a spilce will be made above grade in the Junction box. Junction box shall be placed on the pole approximately 1' above ground level. Splicing shall be done In the Junction box and a In-the-line fuse shall be installed. 8. Photo Control: Photo control is to be faced as nearly north as practical. 9. Locks.' One-shot, loop-l~/pe locks are to be placed at each feed point by the elec-~rlcal contractor. 10. Cx~mDletlon: When street Ilghtlng Is completed by the Contractor, he shall contact the Electrical Inspector for inspection (Eugene Boyle, 755-1499 Re electrical contractor shall forward approved copy (blue) of electrical inspection to the City of Anoka or NSP. Re City of Anoka or NSP shall energize the lights and notify the City of addresses and date energized. Final acceptance Is not made until As-Bullts and 5 blue-line copies have been submitted to the Clt~/ Engineer by the Contractor.