08/01/89 - Laserfiche WebLink

Home

~ An As-Built drawing shall be provided to the City showing the location of the conductors between /~e breaker cabinet and ~he pole or poles; these dravlngs shall be provided to the City by the contractor prior to the City accepting the street lights. 5. Cables: All conductors, suitable for direct burial, wlll be type USE, copper cable with ground. 6. Grounding: At the breaker cabinet and at the end of each distrlbutlon clrcult there must be Installed a driven ground as required by National Electric Code Article 1250-84. B. Any dlstrlbutlon clrcult over 300 feet In length must have a driven ground rod at mldpolnt. C. Ground wlre must be Insulated ~Ire suitable for direct burlal. For 120 volt clrcults all conductors wlll be brought up the pole and connections will be made at the fixture. T~e ground wire will be connected to the groundlng lug If provided. If there ls no grounding lug, the fixture shall be grounded to the mast arm. Be Where more than one light Is In line, a splice ~lll be made above grade in the junction box. Junction box shali be placed on the pole approximately 1' above ground level. Spliclng shall be done in the junc~rlon box and a in-the-line fuse shall be installed. 8. ~hoto Control: Photo control ls to be faced as nearly north as practical. 9. ~ One-shot, loop-type locks are to be placed at each feed point by the electrical contractor. 10. Completlon: When street llghtlng Is completed by the Contractor, he shall contact the Electrical Inspector for inspection (Eugene Boyle, 755-1499 Re electrical contractor shall forward approved copy (blue) of electrical inspection to the Cl,*y of Anoka or NSP. Re City of Anoka or NSP shall energize the lights and no~fy the City of addresses and d~te energized. Fl nal acceptance is not made until As-Butlts and 5 blue-line copies have been submitted to the City Engineer by the Contractor.