Laserfiche WebLink
1. Change in elevation of roof ridge. <br />2. Change in direction of roof ridge. <br />3. Roof with dormers (minimum of two (2) <br />dormers, unless Eyebrow Dormer). <br />4. Bay or Oriel Window. <br />5. Porch or Veranda (covering a minimum of 40% <br />of the overall width of the front facade and a <br />minimum of eight (8) feet in depth. <br />6. Portico or Shed Roof Accent over the front <br />entry (minimum covered area of 4' by 10'). <br />7. Facade modulation (other than items listed <br />herein; minimum of 12 inches in depth) <br />8. Roof overhangs (minimum 12 inches on front, <br />side and rear elevations). <br />9. Roof pitch of8-12 or 12-12. <br />c. At least three (3) design features from the following list <br />must be used in construction of a residential building: <br />1. Hip roof. <br />2. Gable accent. <br />3. Side -by -side windows (within 8"; minimum of <br />50% of windows in each story) <br />4. Door sidelight(s) <br />5. Door transom. <br />6. Window transom. <br />7. Side garage bump -out (minimum size 3' by <br />10', exclusive of garage area). <br />d. The remaining four (4) items may be selected from the <br />following list or from the items listed above. <br />1. Decorative door architrave. <br />2. Decorative window architrave. <br />3. Decorative window cornice, <br />4. Decorative trim molding (including, at a <br />minimum, fascia, soffit & corner trim). <br />5. Architectural elements (e.g. quoins, pilasters, <br />soldier courses, friezes, cornices, dentils, etc. <br />6. Pent roof or pent roof return. <br />7. Accent siding. <br />8. Shutters (all front, rear and side elevations). <br />9. Window grids (permanent). <br />10. Decorative front door (minimum 25% glazing). <br />11. Decorative gable vents. <br />12. Keystone (over all first floor, front facade windows <br />and doors). <br />