Agenda - Council - 07/10/1990 - Laserfiche WebLink

Home

I I I ~ An As-Bullt drawing shall be provided to the Cl~/ show lng the location of the conductors between the breaker cabinet and the pole or poles; these drawings shall be provided to the City by the contractor prior to the CI~ accepting the street Itghts. 5. Cables.' All conductors, suitable for direct burial, wlll be type USE, copper cabie wlth ground. 6. Groundlng; At the breaker cabinet and at the end of each distribution ctrcult there must be installed a driven ground as r~uired by National Electric Code Article J250-84. B. Any distribution circult over 300 feet In length must have a driven ground rod at midpoint. C. Ground wlre must be insulated wire sultable for direct burial. 7. Clrcults: For 120 volt clrcults all conductors will be brought up the pole and connections wlll be made at the fixture. The ground wlre wlll be connected to the groundlng lug if pro¥1ded. If there is no groundlng lug, the fixture shall be grounded to the mast arm. Where more than one light ls in line, a splice will be made above grade in the Junction box. Junction box shall be placed on the pole approximately 1' above ground level. Spllclng shall be done in the junction box and a in-the-line fuse shall be installed. 8. Photo Control: Photo control is to be faced as nearly north as practical. 9. Locks.' One-shot, loop-type locks are to be placed at each feed point by the electrical contrac~or. 10. Completlon: When street lighting is completed by the C~ntractor, he shall contact the Electrical Inspector for Inspection (Eugene Boyle, 755-1499 The electrical contractor shall forward approved copy (blue) of electrlcal Inspection to the CI~/ of Anoka or NSP. The City of Anoka or NSP shall energlze the lights and notify the City of addresses and date energized. Final acceptance ls not made until As-Builts and 5 blue-line copies have been submltted to the CI~ Engineer by the Contrac~or.