Laserfiche WebLink
Marlite Guide Specification 6/5/13 <br />Decorative FRP Wall Panels <br />1.5 QUALITY ASSURANCE <br />A. Conform to building code requirements for interior finish for smoke and flame spread <br />requirements as tested in accordance with: <br />1. ASTM E 84 (Method of test for surface burning characteristics of building Materials) <br />a. Wall Required Rating — Class [A] [C]. <br />B. Sanitary Standards: System components and finishes to comply with: <br />1. United States Department of Agriculture (USDA) requirements for food preparation <br />facilities, incidental contact. <br />2. Food and Drug Administration (FDA) 1999 Food Code 6-101.11. <br />3. Canadian Food Inspection Agency (CFIA) requirements. <br />1.6 DELIVERY, STORAGE AND HANDLING <br />A. Deliver materials factory packaged on strong pallets. <br />B. Store panels and trim lying flat, under cover and protected from the elements. Allow panels to <br />acclimate to room temperature (70°) for 48 hours prior to installation. <br />1.7 PROJECT CONDITIONS <br />A. Environmental Limitations: Building are to be fully enclosed prior to installation with <br />sufficient heat (70°) and ventilation consistent with good working conditions for fmish work <br />B. During installation and for not less than 48 hours before, maintain an ambient temperature and <br />relative humidity within limits required by type of adhesive used and recommendation of <br />adhesive manufacturer. <br />1. Provide ventilation to disperse fumes during application of adhesive as recommended by <br />the adhesive manufacturer. <br />1.8 WARRANTY <br />A. Furnish one year guarantee against defects in material and workmanship. <br />PART 2 - PRODUCTS <br />2.1 ACCEPTABLE MANUFACTURER <br />A. Marlite; 202 Harger Street, Dover, OH 44622. 800-377-1221 FAX (330) 343-4668 Email: <br />info@marlite com www.marlite.com. <br />B. Product: <br />1. Standard FRP <br />Decorative Fiberglass Reinforced Wall Panels 09 7720 - 2 <br />