|
PROJECT INFORMATION
<br />MILLENIUMTM ROUND
<br />MR13 SERIES - DEEP PROFILE HOUSING
<br />PRODUCT FEATURES:
<br />» Surface mount — ceiling or wall; 13"Dia.x6.5"D
<br />» Peace of Mind Guarantee® against breakage
<br />» Dust and water protected to IP64 standards
<br />BD
<br />SPECIFICATIONS
<br />CD ED
<br />Job Name
<br />Fixture TypP
<br />Catalog Number
<br />Approved by
<br />XC WITH RED LED LIGHT SOURCE
<br />HOUSING: Marine grade die-cast aluminum. Rib reinforced construction. Integral heat sinks. Housing flange interlocks and wraps around lens base producing maximum moisture deflection and
<br />resistance to prying. Housing provided with four -point mounting holes, one wireway hole and temporary junction box mounting drill points. Standard black, bronze or white exteriorTGIC polyester
<br />powder coat — 5-step pre-treatment. See Ordering Information for optional finishes.
<br />REFLECTOR: Compact Fluorescent and LED: Full reflector/wire cover — 90% reflectivity. HID: Full reflector/wire cover. High efficiency aluminum.
<br />LENS: UV -stabilized, high impact resistant, virgin injection molded polycarbonate. High efficiency blondel fluted lens obscures lamp image and maximizes uniformity. Close tolerance push/turn/lock-
<br />in-place mating of injection molded lens and lens base. Lens and lens base secured with one concealed captive Torx® with center pin fastener.
<br />LENS BASE: Lens base shields lamp from viewing angles. High impact resistant, injection molded opaque black, bronze or white polycarbonate. Optional Light Gray, Silver, Forest Green or Custom
<br />Color (see Ordering Information below) are chemically bonded, impact resistant finishes.
<br />GASKETING: Die -cut, closed cell neoprene self adhesive gasket seals housing to mounting surface. Closed cell, silicone "0" ring gaskets positioned and friction secured in gasket channels of lens
<br />base and housing.
<br />HARDWARE: One stainless steel Torx® with center pin fastener.
<br />ELECTRICAL: Fluorescent magnetic ballasts — 120V/277V power factor corrected, fluorescent electronic 120/277/347 and dual voltage ballasts high power factor (<10%THD), HID ballasts high
<br />power factor. Metal halide lamps utilize pulse start technology. Shock absorbing, medium base lamp sockets provided for HID lamps. LED: Replaceable high -brightness ANSI 3500K (80 CRI min.),
<br />4000K (70 CRI min.), or 5000K (70 CRI min.) white LED array. 120-277VAC, high power factor electronic driver. LED dimming capability controlled through compatible 0-10V dimmer (supplied by
<br />others); 10-100% dimming range. See options for higher CRI lamp availability.
<br />INSTALLATION: For wall mount installation, mount lamp base up on all HID lamp sources.
<br />PHOTOMETRICS: Photometry tested to the IESNA LM-79-08 standard by an ILAC/IS017025 accredited laboratory. For additional photometric information, go to www.kenall.com.
<br />WARRANTY: Standard four -point mounting and polycarbonate lens required for Peace of Mind Guarantee®. One (1) year warranty against defects in materials and workmanship. Five (5) year
<br />warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.
<br />PATENT: U.S. Patent No. 6,042,251.
<br />LISTINGS: Luminaire is certified to UL Standards by either Underwriters Laboratory or Intertek Testing Laboratory for wet location (listing includes Emergency Battery Pack "EL" option). UL certified
<br />IP64 per IEC 60598.
<br />LED
<br />PEACE DF MIND
<br />Guarantee°
<br />s CTI).
<br />ORDERING INFORMATION (Ex: MR13BD-PP-DB-50L40K-1-DV)
<br />Model
<br />Lens Type Finish Lamp Type
<br />Model
<br />MR13BD Bar
<br />MR13CD Cross
<br />MR13ED Eyelid
<br />MR13FD Full Face
<br />Lens Type
<br />PP Pearlescent Polycarbonate
<br />S Clear Starburst Polycarbonate
<br />(n/a with LED)
<br />Finish
<br />DB Dark Bronze
<br />FG Forest Green
<br />LG Light Gray
<br />MB Matte Black
<br />MW Matte White
<br />SL Silver
<br />CC Custom Color (Consult factory)
<br />Lamp Qty Voltage
<br />Lamp Type (Quantity/Ballast/Volt/Starting Temp)
<br />50L35KA 50 Watt 3500K LED (1/DCC/120-277V/-40°F)
<br />50L4OKA
<br />50L5OKA
<br />7
<br />13
<br />13Q
<br />18Q
<br />26Q
<br />32P
<br />42P•
<br />35S•
<br />50Mt•
<br />50S•
<br />70S•
<br />50 Watt 4000K LED (1/DCC/120-277V/-40°F)
<br />50 Watt 5000K LED (1/DCC/120-277V/-40°F)
<br />7 Watt Twin (1,2/MB/120,277/0°F)
<br />13 WattTwin (1,2/MB/120,277/32°F)
<br />13 Watt Quad (1,2/RS/120,277,347/0°F)
<br />18 Watt Quad (1,2/RS/120,277,347/0°F)
<br />26 Watt Quad (1,2/RS/120,277,DV,347/0°F)
<br />32 Watt PLT (1/RS/120,277,DV,347/0°F)
<br />42 Watt PLT (1/RS/120,277,DV,347/0°F)
<br />35Watt HPS (1/HPF/120,277/-40°F)
<br />50 Watt MH (1/HPF/120,277,347/-20°F)
<br />50 Watt HPS (1/HPF/120,277/-40°F)
<br />70 Watt HPS (1/HPF/120,277,347/-20°F)
<br />• n/a with PIA lens
<br />A n/a with MR13ED
<br />Options
<br />Lamp Quantity
<br />See Lamp Type for availability
<br />1 One Lamp
<br />2 Two Lamps
<br />Voltage
<br />See Lamp Type for availability
<br />120 120 Volts
<br />277 277 Volts
<br />347. 347 Volts
<br />DV• 120-277 Volts
<br />electronic ballasts &
<br />LED driver only
<br />Accessories
<br />Options
<br />EL* One -Lamp WL Emergency Pack (32°F)
<br />(max 32 total system watts)
<br />BPC Photo Control — Shielded Button Type
<br />(120 or 277V only, 277 Volt n/a with 70S)
<br />10KV IEEE C62.41.2 C High Surge Protector
<br />(LED only)
<br />FS Single Fuse & Holder
<br />NAT Natatorium Environment Option
<br />QR Quartz restrike system for maximum
<br />75 Watt DC bayonet quartz lamp (see C-0796)
<br />QRC Hot/Cold Quartz restrike
<br />QS Quartz socket only
<br />R80 Minimum 80 CRI (4000K LED only)
<br />Accessories
<br />C-0796 75 Watt DC Bay Quartz Lamp
<br />9500 Torx® Screwdriver
<br />t UV shielding lamp supplied
<br />• n/a with BPC
<br />* 120-277 Volts only. n/a with LED lamp
<br />www.kenall.com P: 800-4-Kenall F: 847-360-1781 1020 Lakeside Drive Gurnee, Illinois 60031
<br />When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers,
<br />and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.
<br />Content of specification sheets is subject to change, please consult www kenall com for current product details ® 2014 Kenall Mfg Co All rights reserved
<br />MR13 D-012014
<br />
|