Agenda - Council Work Session - 05/26/2015 - Joint CC & Planning Comm

Home

Wall Signs Wall signs are permitted within all COR sub -districts. Building identity signage highlighted by architectural elements (cornice) — Tenant signs incorporated into building "sign band" above the awning Wall signs shall be permitted on one (1) wall, except that lots with frontage on more than one (1) street may have signage on one (1) wall per street frontage. Within the COR1, COR3, COR4 and COR5 districts, the following standards apply: A. Wall -mounted or painted signs, provided the following standards are met: 1. The sign shall be affixed to the front facade of the building, and shall project outward from the wall to which it is attached no more than six inches (6"). 2. Single Tenant Buildings. Each building shall be allowed one (1) wall sign per street frontage. Signage must be located on the street elevation. The area of the sign shall not exceed five (5%) percent of the ground floor building facade area or fifty (50) square feet, whichever is less. 3. Multi -Tenant Buildings. a. Each building shall be allowed wall signage on the street frontage elevation. For buildings with multiple street frontages, the allowable signage is per street frontage. Signage must be located on the street elevation. b. Each building is allowed wall signage that shall not exceed 5% of the wall area of the building facade adjacent to the street or 50 square feet, whichever is less. c. Tenant signage must be located on the tenant lease space. d. At least fifty (50%) percent of the allowed signage must be allocated to ground floor tenants and located on the ground floor. e. Signage is limited to a maximum of one (1) sign per business/tenant, except that tenants with frontage on multiple streets may be permitted to have signage on each street frontage. f. Multi -tenant buildings must have wall signs of similar design. Sign permits for tenants in multi -tenant buildings shall only be permitted by the City after the Design Framework - The COR Page 34 February 28, 2012 111 11 i'II[iIMMINI II g•gS gal t Wall Signs Wall signs are permitted within all COR sub -districts. Building identity signage highlighted by architectural elements (cornice) — Tenant signs incorporated into building "sign band" above the awning Wall signs shall be permitted on one (1) wall, except that lots with frontage on more than one (1) street may have signage on one (1) wall per street frontage. Within the COR1, COR3, COR4 and COR5 districts, the following standards apply: A. Wall -mounted or painted signs, provided the following standards are met: 1. The sign shall be affixed to the front facade of the building, and shall project outward from the wall to which it is attached no more than six inches (6"). 2. Single Tenant Buildings. Each building shall be allowed one (1) wall sign per street frontage. Signage must be located on the street elevation. The area of the sign shall not exceed five (5%) percent of the ground floor building facade area or fifty (50) square feet, whichever is less. 3. Multi -Tenant Buildings. a. Each building shall be allowed wall signage on the street frontage elevation. For buildings with multiple street frontages, the allowable signage is per street frontage. Signage must be located on the street elevation. b. Each building is allowed wall signage that shall not exceed 5% of the wall area of the building facade adjacent to the street or 50 square feet, whichever is less. c. Tenant signage must be located on the tenant lease space. d. At least fifty (50%) percent of the allowed signage must be allocated to ground floor tenants and located on the ground floor. e. Signage is limited to a maximum of one (1) sign per business/tenant, except that tenants with frontage on multiple streets may be permitted to have signage on each street frontage. f. Multi -tenant buildings must have wall signs of similar design. Sign permits for tenants in multi -tenant buildings shall only be permitted by the City after the Design Framework - The COR Page 34 February 28, 2012