Agenda - Council Work Session - 05/26/2015 - Joint CC & Planning Comm

Home

C. The height of the top edge of the signboard shall not exceed the height of the wall from which the sign projects, if attached to a single story building, or the height of the sill or bottom of any second story window, if attached to a multistory building. D. The distance from the building wall to the signboard shall not exceed six inches (6"). E. The width of the signboard shall not exceed three (3) feet. F. Limited to one (1) sign per business. Projecting sign area shall be deducted from the allowable wall signage area. G. Granted to ground floor commercial uses only. Awning Signs Awning signs are allowed in all COR sub -districts. Awning signs are allowed for ground floor uses only, provided that the following standards are met: A. If acting as the main business sign, it shall not exceed 24 square feet in area, and the height of the lettering, numbers, or graphics shall not exceed 12 inches. B. If acting as an auxiliary business sign, it shall be located on the valance only, shall not exceed four (4) square feet in area, and the height of the lettering, numbers, or graphics shall not exceed four inches (4"). C. Limited to two such signs per business. D. If acting as the main business sign, it shall not be in addition to a wall -mounted or applied letter sign. Sandwich Board Signs Sandwich board signs are permitted within all COR sub -districts. A. One (1) sandwich board sign per business is permitted in any business, commercial and mixed use district and shall be located within five feet (5') of the main building entrance to the business it advertises. B. Sandwich board signs shall be displayed only during open business hours and must be removed daily. C. Sandwich board signs shall be no more than a total of two feet (2') in width and three feet (3') in height Design Framework — The COR February 28, 2012 Page 37