Agenda - Council - 07/26/1983 - Laserfiche WebLink

Home

I I I I I I I I I I I I I I I I I I I zoning district. Major variations from city development standards were increased density and a mixture of housing types. A conventional single-family subdivision built on the site would provide 100, lO,800osquare foot lots at a density of about three units per acre. Shannon Park provides 140 single-family lots averaging 6,000 square feet and 41 townhouses for an overall density between 5 and 6 units per acre (see Figures 1 and 2). A number of other variations from city development standards were approved in Shannon Park. These are summarized in Table 1 below. Single-Family Portion Table 1 VARIATIONS FROM CITY DEVELOPMENT STANDARDS R-2 Single-Family Shannon Park PUD District Standard .Lot size Lot width · Front yard setback ? Side yard: house side garage side Off-street parking Garage 5,300 sq. f6. minimum 10,800 sq. ft. 6,00Osq. ft..average 50 ft. min.754 ft. aver. 25 ft. 7 1/2 ft. 3.ft. 2 spaces 3 Units: 1 enclosed 5 units: optional/space provided 800-1085 sq. ft. Minimum floor area 80 ft. 35 ft. 10 ft~ 5 ft. 1 space 1 enclosed 960 sq. ft. Townhouse Portion Area per unit Front yard Off-street parking Garage Minimum floor area Shannon Park PUD 6,200 sq. ft. 25 ft. 3 to 4 spaces 1 and 2 enclosed 840 and 900 sq. ft. T Townhouse District Standard 6,200 sq. ft. 35 ft. 2 1/2 spaces ? enclosed 960 sq. ft. Subdivision Standards Rig~t-of-way width Paving width Park dedication Shannon Park PUD 60 ft. major streets/ 50 ft. other streets 31 ft. 5.6 acres City Code Standard 60 ft. 31 ft. 4.98 acres Because of the reduced standards, development cost savings are possible within Shannon Park. Table 2 illustrates some of the net savings possible by reducing the single-family lot width from 80 to 55 feet, and the front yard setback from 35 to 25 feet.