Laserfiche WebLink
SECTION 0142 00 <br /> SPECIFICATION REFERENCE <br /> PART 1—GENERAL <br /> 1.01 STANDARD SPECIFICATIONS FOR WATERMAIN, SANITARY SEWER AND STORM SEWER <br /> CONSTRUCTION <br /> A. Watermain, sanitary sewer and storm sewer construction including pipe jackingiboring shall conform to the <br /> applicable provisions of the "Standard Specifications for 2600 - Trench Excavation and Backfill/ Surface <br /> Restoration, 2611 - Watermain and Service Line Installation, 2621 - Sanitary Sewer and Storm Sewer <br /> Installation"as published by the City Engineers Association of Minnesota,(CEAM)2013 Edition. <br /> B. Copies of the Standard Specifications are available from the CEAM web site at: http://ceam.org <br /> C. References in this Project Manual or on the Plans, to the Standard Specifications, referenced in LOLA above, <br /> shall serve to supplement or modify the Standard Specifications. Portions of the Standard Specifications not <br /> specifically affected by the supplemented information of modification shall remain in effect as originally <br /> written. <br /> D. THREADED ITEMS-All threaded items furnished under this contract,including but not limited to mechanical <br /> joint connectors,flanged joint connectors,mainline valves, saddles,corporation stops,curb stops,hydrants, and <br /> air release valves shall be furnished to the nominal size as specified with ENGLISH threads. <br /> 1.02 STANDARD SPECIFICATIONS FOR GRADING,STREET AND SURFACE IMPROVEMENTS <br /> A. All of Divisions II and III, and any specifically referenced Division I sections of the Minnesota Department of <br /> Transportation (MnDOT), "Standard Specifications for Construction" and "Materials Lab Supplemental <br /> Specifications for Construction",2014 Editions,together with all the Supplemental Specifications shall apply to <br /> all construction performed under this Contract except as modified in these Specifications. Unless noted, the <br /> requirements in the Specifications are in addition to the MnDOT Specification section being referenced. <br /> B. Whenever the word "Contracting Authority," "Department" or "Owner" is used in the sense of ownership as <br /> part of these Specifications and Contract,it shall mean Owner as defined in the Form of Agreement. <br /> C. References in this Project Manual or on the Standard Specifications referenced in 1.02.A above, shall serve to <br /> supplement or modify the Standard Specifications. Portions of Standard Specifications not specifically affected <br /> by the supplemented information or modification shall remain in effect as originally written. <br /> 1.03 ABBREVIATIONS <br /> A. Wherever the following abbreviations are used,they shall have the meanings indicated. <br /> AASHTO American Association of the State Highway and Transportation Officials <br /> ACI American Concrete Institute <br /> Al The Asphalt Institute <br /> ASTM American Society for Testing and Materials <br /> AWWA American Water Works Association <br /> CEAM City Engineer's Association of Minnesota <br /> CLFMI Chain Link Fence Manufacturers Institute <br /> MN/DOT Minnesota Department of Transportation <br /> OSHA Occupational Safety and Health Act of 1970 <br /> PCA Portland Cement Association <br /> PART 2—PRODUCTS (Not used) <br /> PART 3—EXECUTION (Not used) <br /> Division 1—General Requirements <br /> DV 1-5 <br />