Laserfiche WebLink
b. the suitability of all materials with <br />respect to intended use, fabrication, <br />shipping, handling, storage, <br />assembly, and installation pertaining <br />to the performance of the Work; <br />c. all information relative to <br />Contractor's responsibilities for <br />means, methods, techniques, <br />sequences, and procedures of <br />construction, and safety precautions <br />and programs incident thereto; and <br />d. shall also have reviewed and <br />coordinated each Shop Drawing or <br />Sample with other Shop Drawings <br />and Samples and with the <br />requirements of the Work and the <br />Contract Documents. <br />2. Each submittal shall bear a stamp or <br />specific written certification that <br />Contractor has satisfied Contractor's <br />obligations under the Contract <br />Documents with respect to Contractor's <br />review and approval of that submittal. <br />3. With each submittal, Contractor shall <br />give Engineer specific written notice of <br />any variations, that the Shop Drawing or <br />Sample may have from the requirements <br />of the Contract Documents. This notice <br />shall be both a written communication <br />separate from the Shop Drawing's or <br />Sample Submittal; and, in addition, by a <br />specific notation made on each Shop <br />Drawing or Sample submitted to <br />Engineer for review and approval of each <br />such variation. <br />D. Engineer's Review <br />1. Engineer will provide timely review of <br />Shop Drawings and Samples in <br />accordance with the Schedule of <br />Submittals acceptable to Engineer. <br />Engineer's review and approval will be <br />only to determine if the items covered by <br />the submittals will, after installation or <br />incorporation in the Work, conform to <br />the information given in the Contract <br />Documents and be compatible with the <br />design concept of the completed Project <br />as a functioning whole as indicated by the <br />Contract Documents. <br />2. Engineer's review and approval will not <br />extend to means, methods, techniques, <br />sequences, or procedures of construction <br />(except where a particular means, <br />method, technique, sequence, or <br />procedure of construction is specifically <br />and expressly called for by the Contract <br />Documents) or to safety precautions or <br />programs incident thereto. The review <br />and approval of a separate item as such <br />will not indicate approval of the assembly <br />in which the item functions. <br />3. Engineer's review and approval shall not <br />relieve Contractor from responsibility for <br />any variation from the requirements of <br />the Contract Documents unless <br />Contractor has complied with the <br />requirements of Paragraph 6.17.C.3 and <br />Engineer has given written approval of <br />each such variation by specific written <br />notation thereof incorporated in or <br />accompanying the Shop Drawing or <br />Sample. Engineer's review and approval <br />shall not relieve Contractor from <br />responsibility for complying with the <br />requirements of Paragraph 6.17.C.1. <br />E. Resubmittal Procedures <br />1. Contractor shall make corrections <br />required by Engineer and shall return the <br />required number of corrected copies of <br />Shop Drawings and submit, as required, <br />new Samples for review and approval. <br />Contractor shall direct specific attention <br />in writing to revisions other than the <br />corrections called for by Engineer on <br />previous submittals. <br />6.18 Continuing the Work <br />A. Contractor shall carry on the Work and adhere <br />to the Progress Schedule during all disputes or <br />disagreements with Owner. No Work shall be <br />delayed or postponed pending resolution of <br />any disputes or disagreements, except as <br />permitted by Paragraph 15.04 or as Owner <br />and Contractor may otherwise agree in <br />writing. <br />6.19 Contractor's General Warranty and Guarantee <br />A. Contractor warrants and guarantees to Owner <br />that all Work will be in accordance with the <br />Standard General Conditions <br />00 72 00-25 <br />