Laserfiche WebLink
1. EXECUTIVE SUMMARY <br />City Improvement Project 17-01 proposes to reconstruct Alpine Drive between Armstrong <br />Boulevard/CSAH 83 and Variolite Street which totals approximately 3,600 linear feet (0.68 <br />miles) in length. A map showing the location and scope of the proposed improvements is <br />included as Figure 1 in Appendix A. <br />This segment of Alpine Drive was constructed in 2001 using bituminous pavement between <br />B618 concrete curb and gutter. The street was constructed to a width of 32 feet from face -of - <br />curb to face -of -curb in locations where parking is restricted, and to 38 feet from face -of -curb to <br />face -of -curb in locations where parking is allowed along one side. Alpine Drive is centered <br />within an 80 foot wide right-of-way. A storm sewer system also exists under this segment of <br />Alpine Drive including numerous catch basins which drain runoff from the street to adjacent <br />low-lying areas using concrete storm sewer pipes. <br />City staff evaluates and rates the condition of pavement sections on all city streets on an annual <br />basis using the Pavement and Surface Evaluation Rating (PASER) system. In the fall of 2016, <br />the pavement section of the above -referenced street segment were rated with a PASER rating of <br />3 which indicates this street is past the point of applying mill and overlay improvements. The <br />current condition of this street requires City staff to patch the street at least once per year, <br />particularly before winter so the street can be plowed without tearing up the pavement in the <br />process. Pictures of the street are located in Appendix A. <br />Proposed improvements include removing and replacing damaged sections of concrete curb and <br />gutter and reconstructing the existing bituminous pavement section using a process known as <br />Full Depth Reclamation, or FDR. This process involves milling the top 3 inches of existing <br />bituminous pavement which is then hauled off site, reclaiming (grinding and mixing) the <br />remaining bituminous pavement along with approximately the existing recycled concrete base <br />material, mixing and spreading the reclaimed material on top of the reshaped and compacted <br />subgrade, then placing 3.5 inches of new bituminous pavement on top. This results in a 10-ton <br />pavement design that meets current State Aid standards. <br />The existing storm sewer system is in good condition and meets all current State Aid standards <br />and is therefore not proposed to be improved. An off-street bike trail exists along the north side <br />Alpine Drive but is not proposed to be improved as part of this project. <br />Pavement corings, soil borings, and associated pavement reconstruction design recommendations <br />were just recently completed so staff has not yet had an opportunity to discuss the proposed <br />improvements with owners of abutting properties. However, Staff recently mailed letters to the <br />owners of abutting properties for the purpose of explaining the proposed improvements and <br />requesting meetings with impacted and interested parties to discuss the proposed improvements <br />and gather public input. <br />The engineer's opinion of probable costs for completing the proposed improvements on Alpine <br />Drive as outlined in this report is $463,000. Estimated costs include 23% indirect costs for <br />administrative, engineering, finance and legal costs. A summary of the engineer's opinion of <br />probable costs is included in Appendix B. <br />Feasibility Report <br />Alpine Drive Reconstruction <br />City of Ramsey Project No. 17-01 <br />Page 1 <br />