Agenda - Council - 06/27/2017 - Laserfiche WebLink

Home

Unless otherwise specified, all pipe and fittings shall be SDR 35 and connections shall be push - on with elastomeric gasket joints which are bonded to the inner wall of the gasket recess of the bell socket. PVC pipe and fittings for pressure sewer and forcemains shall meet the requirements of 2611.2 A3 for watermain class pipe. Corrugated polyvinyl chloride pipe and fittings with smooth interior shall conform to the requirements of ASTM F-949 for the size and wall thickness indicated on the Plans, Specifications, and Special Provisions. Unless otherwise specified, all pipe and fittings shall be push -on with snug fit elastomeric joints meeting tightness requirements of ASTM D-3212 and ASTM F477. A6 Cast Iron Soil Pipe Unless otherwise specified in the Plans, Specifications, and Special Provisions, cast iron soil pipe shall be service weight pipe meeting the requirements of ASTM A-74 and the Plans, Specifications, and Special Provisions. Unless otherwise specified, pipe joints shall be push -on, sealed with elastomeric gaskets, meeting the requirements of ASTM C-564. A7 Acrylonitrile-Butadiene-Styrene Pipe Acrylonitrile-Butadiene-Styrene (ABS) solid wall pipe and fittings shall conform to the requirements of ASTM D-2751 and shall be gasket seal joints, assembled as recommended by the pipe manufacturer. Unless otherwise specified, all pipe and fittings shall be push -on with snug fit elastomeric joints meeting tightness requirements of ASTM D-3212 and ASTM F477. Solvent cemented joints, assembled as recommended by the pipe manufacturer, shall be provided only where specifically indicated in the Plans, Specifications, and Special Provisions. A8 Corrugated Polyethylene Pipe Dual -Wall and Triple -Wall Corrugated Polyethylene Pipe (PE/HDPE) for gravity sewers shall conform to the requirements of AASHTO M-294 and Section 18 of the AASHTO Standard Specifications for Highway Bridges for storm sewer pipe sizes twelve inch (12") through sixty inch (60"). Joints shall be bell and spigot push -on type, soil -tight and watertight joints in accordance with ASTM D3212 and ASTM F477. Pipe manufacture, watertight joint testing, and installation shall conform to current MnDOT requirements, ASTM C969, and as indicated in the Plans, Specifications, and Special Provisions. A9 Solid Wall High Density Polyethylene Pipe Solid wall HDPE for pressure and gravity sewer pipes shall meet the requirements of 2611.2A4. A10 Fiberglass Reinforced Pipe Fiberglass Reinforced Pipe (FRP/GRP) for gravity sewers shall meet requirements of ASTM D3262 for Glass -Fiber -Reinforced Thermosetting Resin pipe, such as reinforced thermosetting - resin pipe (RTRP) and reinforced polymer mortar pipe (RPMP; natural polymers not included) for use in gravity -flow systems. The pipe shall be manufactured with polyester resin systems with a proven history of performance in this application. Page 43