Agenda - Council - 06/27/2017 - Laserfiche WebLink

Home

SPECIAL PROVISIONS - SP20I6 BOOK Last Revision by CO Special Provisions: 2/08/17 S-5.3 requirements. Created August 20, 2015 Page 5 SP 0202-101 The Department will not directly compensate the Contractor for compliance with these S-6 USE OF ADHESIVE ANCHORS Do not use adhesive anchors in sustained tension. Contractor may use adhesive anchors, in a non - direct tensile application, such as metal rail attachment. S-7 (1203) ACCESS TO PROPOSAL PACKAGE MnDOT 1203 is hereby deleted from the MnDOT Standard Specifications. S-8 (1206) PREPARATION OF PROPOSAL The provisions of MnDOT 1206 are supplemented and/or modified with the following: S-8.1 MnDOT 1206.1 is hereby deleted from the MnDOT Standard Specifications. S-8.2 following: MnDOT 1206.2 is hereby deleted from the MnDOT Standard Specifications and replaced with the 1206.2 ALLOWABLE SUBSTITUTIONS For all Proposals the Bidder shall use the following method: (1) Submit a Proposal on the Bid Schedule forms provided by the Department. The Bidder shall: (1.1) Submit a Unit Price in numeric figures for each Pay Item for which a quantity is shown. Assume a numeric quantity of "1" for each "Lump Sum" Pay Item, except as not required in the case of alternate Pay Items, (1.2) Show the extensions resulting from Unit Prices multiplied by the shown quantities in the specified column, and (1.3) Add the extended Pay Item amounts to show the total amount of the Proposal. The Bidder shall write the figures in ink or provide typed or computer printed figures. In the case of a discrepancy between a Unit Price and extension in a Proposal, the Unit Price will govern. If a Bidder fails to provide a Unit Price for any Pay Item on the Bid Schedule, except for "Lump Sum" Pay Items, the Department will reject the Proposal. If a Pay Item in the Proposal requires the Bidder to choose an alternate Pay Item, the Bidder shall indicate its choice in accordance with the Specifications for that Pay Item. An authorized representative of the Bidder must sign the Proposal. S-9 (1209) DELIVERY OF PROPOSALS The provisions of MnDOT 1209 are modified with the following: When submitting a Proposal in accordance with 1206.2, "Allowable Substitutions," of these Special Provisions, the Bidder shall deliver the Proposal and the Proposal Guaranty in a sealed envelope. The Bidder shall mark the sealed envelope with the name of the Bidder, the Project number, and the letting date. The Bidder shall deliver the sealed envelope to the Department as specified in the Advertisement for Bids as follows: (1) To the address specified, (2) In care of the official receiving the Proposals, and (3) By the date and time for opening Proposals.