Agenda - Council Work Session - 11/28/2017

Home

TIERNEY Responsibilities and Conditions Client Responsibilities Contract a licensed electrician to provide high voltage power connections. The system design will determine if optimum placement of outlets is best achieved before or after the installation of the AV equipment. The assigned Project Manager will communicate the specific to you during the project planning. Tierney Brothers recommends that each projector, TV, plasma, LCD, etc. have a dedicated quad electrical outlet. Provide Tierney Brothers with any existing system design specifications, diagrams, room drawings or other materials that would facilitate completion of the proposed Scope of Integration Services. All necessary ceiling tile work involved in the installation, unless an alternative has been indicated in the Scope of Integration Services in this proposal. Prepare, replace, repair or modify any structural or cosmetic changes that Tierney Brothers has made or needs to make. This includes, but is not limited to, ceiling grids, floor tiles, walls and pre- existing equipment. This does not include repair for accidental damage caused by Tierney Brothers. Confirm area is ready for installation when scheduled. This includes but is not limited to the room being vacated, physical conditions confirmed and owner furnished equipment (OFE) available. If the area is not prepared for installation when scheduled or the client has not notified Tierney Brothers five business days in advance of any schedule change or installation cancellation, there will be a $350.00 charge. Rescheduling of the installation will be set for a later date as determined by Tierney Brothers. TBI will not be responsible for the condition and functionality of any existing OFE during the installation process. This includes de -install and reinstall of OFE. Should existing equipment fail or not work properly with our system design, the customer will have the option of sourcing a TBI approved replacement part or TBI will offer a billable replacement alternative. If OFE malfunction causes delays in the installation timeframe, additional billable labor charges may apply. Clients purchasing SMART product are responsible for loading all SMART software on the applicable computers and connection of these computers to the SMARTboard prior to any scheduled training sessions. Complete Customer Configuration Worksheets as requested by Tierney Brothers within five business days. This information is required to properly integrate the new equipment with your existing IT infrastructure. TBI requires access to customer's computer and network at the time of installation to be able to complete installation and testing of the designed system. Return visits to test equipment and functionality may result in additional charges. TBI's initial estimates assume all work may be completed using standard ladders. If a lift is required, additional charges will be incurred and presented as part of a change request. For U of M Installations only: University of Minnesota customers are responsible for contacting their Facilities Management Department to coordinate conduit installation for all A/V wire and cable installations. 1771 Energy Park Drive, Suite 100 St. Paul, MN 55108 www.tierneybrothers.com Tierney Brothers Responsibilities (Upon Authorization) Proceed with ordering the specified equipment and preparing a schedule for completion of the proposed services. Conduct pre -installation site visit (if necessary) involving the main site contact, site facilities representatives and a Tierney Brothers' project manager or a qualified alternate. Review scope, terms and conditions of the installation with the client at the pre -installation site visit. This will include, but is not limited to electrical, construction and cosmetic responsibilities. Basic system training, separate from Professional Development, is included in this proposal. This training will be scheduled and completed by a Tierney Brothers' representative at the end of the project installation. If Professional Development is part of this proposal, sessions must be scheduled within six months of install completion. Clients purchasing SMARTboards: After the installation of the SMARTboard is complete, the SMARTboard USB connection will be tested using the Tierney Brothers installer's laptop. After system functionality is confirmed, the USB connection will be hooked into the client's computer if it is present in the space. For safety reasons, Tierney Brothers will not modify/cut the trays on existing white boards or chalk boards. A solution for mounting over the existing board will be proposed. Any modifications to the existing board would need to be made by the customer prior to the arrival for Tierney Brothers' installation personnel. Scheduling Installations are typically scheduled six to eight weeks from receipt of the customer's purchase order. Custom ordered product may increase the time needed to complete the proposed services. Standard service and support is limited to Monday through Friday, 8:00 AM to 5:00 PM central standard time, excluding national holidays. Expanded service hours may be available for an additional charge if determined necessary. This schedule assumes no delays or obstacles will be encountered in gaining access for the installation. Site Conditions Tierney Brothers cannot enter into work in or otherwise disturb any areas containing asbestos. Tierney Brothers recommends that each Projector, TV, Plasma, LCD, etc. have a duplex receptacle fed off of a dedicated 20 amp circuit available for use. Systems containing multiple racks of amplifiers or other equipment may require additional circuits. Please initial to acknowledge and authorize the Responsibilities and Conditions presented here.