My WebLink
|
Help
|
About
|
Sign Out
Home
Agenda - Council - 08/28/2018
Ramsey
>
Public
>
Agendas
>
Council
>
2018
>
Agenda - Council - 08/28/2018
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
3/17/2025 2:55:13 PM
Creation date
8/29/2018 8:21:32 AM
Metadata
Fields
Template:
Meetings
Meeting Document Type
Agenda
Meeting Type
Council
Document Date
08/28/2018
Jump to thumbnail
< previous set
next set >
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
816
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
Advisory R305.5.2 Approach. This provision leaves the decision of type of accessible <br />vertical access up to the jurisdiction. Long ramps can present difficulties for some <br />persons with disabilities and may require snow clearance. Elevators or lifts entail a <br />maintenance obligation. <br />R305.5.3 Stairs. Stairs shall comply with R407. <br />R305.5.4 Escalators. Escalators shall comply with sections 6.1.3.5.6 and <br />6.1.3.6.5 of ASME A17.1 (incorporated by reference; see R104.2.3) and shall <br />have a clear width of 82 cm (32 in) minimum. <br />R305.6 Roundabout Intersections. Where pedestrian facilities are provided at <br />roundabout intersections, they shall comply with R305.6 and shall contain a pedestrian <br />access route complying with R301. <br />R305.6.1 Separation. If walkways are curb -attached, there shall be a continuous <br />and detectable edge treatment along the street side of the walkway wherever <br />pedestrian crossing is not intended. Where chains, fencing, or railings are used, <br />they shall have a bottom element 38 cm (15 in) maximum above the pedestrian <br />access route. <br />dvisory R305.6.1 Separation. Because the pedestrian crossings are located off to the <br />side of the pedestrian route around the street or highway and noise from continuously <br />circulating traffic may mask useful audible cues. Carefully delineated crosswalk <br />approaches with plantings, low enclosures, curbs, or other defined edges can be effective <br />in identifying the crossing location(s). European and Australian roundabout <br />intersections extend a 6- cm (24-inch) width of tactile surface treatment from the <br />centerline of the ramp or blended transition across the full width of the sidewalk to <br />rovide an underfoot cue. Several manufacturers make a surface of raised bars for this <br />use. The detectable warning surface should not be used, since it indicates the edge of a <br />street or highway. <br />Schemes that remove cyclists from the circulating street or highway by means of a ramp <br />that angles from the curb lane to the sidewalk and then provide re-entry by means of a <br />similar ramp beyond the pedestrian crossing may provide false cues about the location of <br />a crossing to pedestrians who are using the edge of the sidewalk for wayfinding. <br />Designers should consider ways to mitigate this hazard. <br />R305.6.2 Signals. At roundabouts with multi -lane crossings, a pedestrian <br />activated signal complying with R306 shall be provided for each segment of each <br />crosswalk, including the splitter island. Signals shall clearly identify which <br />crosswalk segment the signal serves. <br />Advisory R305.6.2 Signals. There are many suitable demand signals. for this application. <br />Crossings at some roundabout intersections in Australia and the United Kingdom <br />40 <br />
The URL can be used to link to this page
Your browser does not support the video tag.