Laserfiche WebLink
R411.2.2 Double -Leaf Doors and Gates. At least one of the active leaves of <br />doorways with two leaves shall comply with R411.2.3 and R411.2.4. <br />R411.2.3 Clear Width. Door openings shall provide a clear width of 82 cm (32 <br />in) minimum. Clear openings of doorways with swinging doors shall be <br />measured between the face of the door and the stop, with the door open 90 <br />degrees. Openings more than 61 cm (24 in) deep shall provide a clear opening of <br />92 cm (36 in) minimum. There shall be no projections into the required clear <br />opening width lower than 87 cm (34 in) above the finish floor or ground. <br />Projections into the clear opening width between 87 cm (34 in) and 2 m (6.7 ft) <br />above the finish floor or ground shall not exceed 100 mm (4 in). <br />R411.2.4 Maneuvering Clearances. Minimum maneuvering clearances at doors <br />and gates shall comply with R411.2.4. Maneuvering clearances shall extend the <br />full width of the doorway and the required latch side or hinge side clearance. <br />R411.2.4.1 Swinging Doors and Gates. Swinging doors and gates shall <br />have maneuvering clearances complying with Table R411.2.4.1. <br />R411.2.4.1 Maneuverin; Clearances at Manual Swinging Doors and Gates <br />Type of Use <br />Approach Door or <br />Direction Gate Side <br />From front Pull <br />From front Push <br />From hinge side Pull <br />From hinge side Pull <br />From hinge side Push <br />From latch side Pull <br />From latch side Push <br />Minimum Maneuvering Clearance <br />Perpendicular to <br />Doorway <br />153 cm (60 in) <br />122 cm (48 in) <br />153 cm (60 in) <br />137 cm (54 in), <br />107 cm (42 in) <br />122 cm (48 in)4 <br />107 cm (42 in)4 <br />Parallel to Doorway (beyond <br />latch side unless noted) <br />46 cm (18 in) <br />0 mm (0 in)1 <br />92 cm (36 in) <br />107 cm (42 in) <br />56 cm (22 in)3 <br />61 cm (24 in) <br />61 cm (24 in) <br />1. Add 305 cm (12 in) if closer and latch are provided. <br />2. Add 150 mm (6 in) if closer and latch are provided. <br />3. Beyond hinge side. <br />4. Add 150 mm (6 in) if closer is provided. <br />R411.2.4.2 Doorways without Doors or Gates, Sliding Doors, and <br />Folding Doors. Doorways less than 92 cm (36 in) wide without doors or <br />gates, sliding doors, or folding doors shall have maneuvering clearances <br />complying with Table R411.2.4.2. <br />R411.2.4.2 Maneuvering Clearances at Doorways without Doors or Gates, Manual <br />Sliding Doors, and Manual Folding Doors <br />Minimum Maneuvering Clearance <br />Approach Perpendicular to Parallel to Doorway (beyond stop/latch <br />Direction Doorway side unless noted) <br />From Front 122 cm (48 in) 0 mm (0 in) <br />59 <br />