Agenda - Planning Commission - 12/05/2019

Home

Maximum building lot 35% Maximum driveway 20 feet width Side yard setback for 5 feet driveways Required driveway Bituminous or concrete surface (2) Parking. a. The surfaces of parking stalls, aisles, and access driveways shall be constructed with blacktop or concrete and properly maintained. The term "properly maintained" includes keeping the blacktop or concrete in good condition and free fromchuckholes and other types of surface cracks and breakage. b. The entire perimeter of the parking stalls, aisles and access driveways shall be curbed with six-inch-high curbing of poured concrete. c. All required parking stalls shall be located on thepremises of the principal building. d. A parking stall shall not be less than 180 square feet in area, with a minimum width of nine feet. e. Additional parking spaces may be required by the city. (3) Streets. a. Public streets.Residential developments in this district must provide one main thoroughfare through the development and main thoroughfares must be dedicated as public streets. b. Private streets.Private streets or driveway collectors are permitted if they serve as access driveways from dwelling units to public streets and meet the city engineer's street standards together with the dimension standards described below: 1. Minimum private street width with no parking permitted: 24 feet. 2. Minimum private street width with parking permitted on one side of street: 28 feet. 3. Minimum private street width with parking permitted without restriction: 32 feet. 4. Maximum private street length without a turnaround provided: 200 feet. 5. Maximum private street length with a turning provision provided: 300 feet. 6. Maximum private street length with a cul-de-sac provided: 600 feet, except that when exceeding 300 feet, the entire length of the private street must be 32 feet wide. 7. Minimum access road width at street frontage: 24 feet. 8. Minimum parking aisle width: 24 feet. 9. Maximum driveway width at road frontage: 20 feet.