Laserfiche WebLink
Layout <br />The following design standards are required for the various housing types proposed within the <br />development. Please note that due to the variety of housing types, it is difficult to apply a <br />single- set of layout standards to the project. Any perceived deviation to City Code appears to <br />be reasonable with the utilization of a Planned Unit Development. A significant portion of the <br />project area is being preserved for open space, a key component of the PUD Approval, and a <br />requirement of the R-2 Residential District. <br />Bulk Standards <br />Standards <br />Requirement <br />Proposed <br />Lot size <br />Allowed lot types outlined on <br />Page 1 <br />40 foot lots (Villa) —19 <br />50 foot lots (Villa) - 6 <br />50 foot lots (SF) — 40 <br />55 foot lots (SF) —10 <br />60 foot lots (SF) — 6 <br />Minimum density (net) <br />3.0 <br />Overall ^3.8 units/acre <br />Maximum density (net) <br />7.0 <br />Front yard setback from public or <br />private street <br />25 feet <br />25 feet <br />Building setback from exterior <br />development boundary line <br />25 feet (detached) <br />25 feet <br />Minimum separation between <br />buildings, including any <br />appurtenances thereto (i.e., <br />patios, decks) <br />10 feet (detached) <br />10 feet (wall to wall) <br />(8 feet with overhang) <br />Maximum lot coverage <br />35% <br /><35% <br />Maximum building height <br />(measured from lowest adjacent <br />grade to mean gable) <br />35 feet <br /><35 feet <br />Side yard easements <br />4 feet <br />4 feet <br />Side yard setback <br />5 feet <br />5 feet <br />Street Widths and Design <br />The proposed street widths are shown at twenty-nine (29) feet. Traditional City Streets in <br />Ramsey are measured at thirty-two (32) foot widths. These street widths were approved with <br />It is our mission to work together to responsibly grow our community, and to provide quality, cost-effective and efficient government <br />services. <br />Page 2 of 6 <br />