Laserfiche WebLink
tenants in multi-tenant buildings shall only be permitted by the City after the <br />building owner has submitted a comprehensive sign plan approved by the Zoning <br />Administrator. The comprehensive sign plan for the building shall include similar <br />design standards including sign material, color, style, spacing and size. <br /> <br />4.Signs for buildings facing Highway 10. Single or multi-tenant buildings that have <br />frontage on Highway 10 or are separated from Highway 10 only by other public right-of- <br />way, shall be allowed to have signage on that street elevation that is up to fifteen (15%) <br />percent of the wall area of that building façade with no maximum square footage. <br /> <br />B.Wall-mounted building directory signs identifying the occupants of a commercial building, <br />including upper story business uses, provided the following standards are met: <br /> <br />1.The sign is located next to the entrance. <br /> <br />2.The sign shall project outward from the wall to which it is attached no more than six <br />inches . <br /> <br />3.The sign shall not extend above the parapet, eave, or building facade. <br /> <br /> <br />4.The height of the lettering, numbers, or graphics shall not exceed twelve inches (12. <br /> <br />5.One (1) such sign is allowed per public building entrance and is allowed in addition to <br />other permitted wall signage. <br /> <br />C.Applied letters may substitute for wall-mounted signs, if constructed of painted wood, <br />painted cast metal, bronze, brass, acrylic or black anodized aluminum. The height of applied <br />letters shall not exceed 12 inches. <br /> <br />D.Logos are considered signs and shall be included in the maximum allowable sign area. <br /> <br />E.Window or door signs, provided that the following standards are met: <br /> <br />1.The sign shall not exceed ten percent of the window or door area or four (4) square feet, <br />whichever is less. <br /> <br />2.The sign shall be silk screened, hand painted, applied letters/graphics, neon tubing or <br />other sign technologies that meet these standards. <br /> <br />3.Limited to one (1) sign per business, applied on either the window or the door, but not <br />on both. <br /> <br />4.The sign shall not have an opaque backing of any type although smoked glass is allowed. <br /> <br />5.Window signage (includes graphics) shall be permitted on the same building walls that <br />have, or are allowed to have, wall signage pursuant to Item A above. Window signage <br />Design Framework The COR (Amendment #1) Page 37 <br />November 27, 2012 <br /> <br />