Agenda - Council - 06/22/2021 - Laserfiche WebLink

Home

101073519 APPENDIX A BOARDING STANDARD The provisions contained in this appendix are not mandatory unless specifically referenced in the adopting ordinance. User note: About this appendix: Appendix A provides minimum specifications for boarding a structure. This can be utilized by a jurisdiction as a set of minimum requirements in order to result in consistent boarding quality. These requirements also provide a reasonable means to elimi- nate having to approve numerous methods or materials for the boarding and securing of a structure. It is important to note that the provisions of Appendix A are not mandatory unless specifically referenced in the adopting ordinance of the authority having jurisdiction. A101 GENERAL A101.1 General. Windows and doors shall be boarded in an approved manner to prevent entry by unauthorized persons and shall be painted to correspond to the color of the existing structure. A102 MATERIALS A102.1 Boarding sheet material. Boarding sheet material shall be minimum 1/2-inch-thick (12.7 mm) wood structural panels complying with the International Building Code. A102.2 Boarding framing material. Boarding framing material shall be minimum nominal 2-inch by 4-inch (51 mm by 102 mm) solid sawn lumber complying with the Interna- tional Building Code. A102.3 Boarding fasteners. Boarding fasteners shall be minimum 3/8-inch-diameter (9.5 mm) carriage bolts of such a length as required to penetrate the assembly and as required to adequately attach the washers and nuts. Washers and nuts shall comply with the International Building Code. A103 INSTALLATION A103.1 Boarding installation. The boarding installation shall be in accordance with Figures A 103.1(1) and A103.1(2) and Sections A103.2 through A103.5. A103.2 Boarding sheet material. The boarding sheet mate- rial shall be cut to fit the door or window opening neatly or shall be cut to provide an equal overlap at the perimeter of the door or window. A103.3 Windows. The window shall be opened to allow the carriage bolt to pass through or the window sash shall be removed and stored. The 2-inch by 4-inch (51 mm by 102 mm) strong back framing material shall be cut minimum 2 inches (51 mm) wider than the window opening and shall be placed on the inside of the window opening 6 inches (152 mm) minimum above the bottom and below the top of the window opening. The framing and boarding shall be predrilled. The assembly shall be aligned and the bolts, washers and nuts shall be installed and secured. A103.4 Door walls. The door opening shall be framed with minimum 2-inch by 4-inch (51 mm by 102 mm) framing material secured at the entire perimeter and vertical members at a maximum of 24 inches (610 mm) on center. Blocking shall also be secured at a maximum of 48 inches (1219 mm) on center vertically. Boarding sheet material shall be secured with screws and nails alternating every 6 inches (152 mm) on center. A103.5 Doors. Doors shall be secured by the same method as for windows or door openings. One door to the structure shall be available for authorized entry and shall be secured and locked in an approved manner. A104 REFERENCED STANDARD A104.1 Referenced standards. Table A104.1 lists the stan- dard that is referenced in various sections of this appendix. The standard is listed herein by the standard identification, the effective date and title and the section or sections of this document that reference the standard. The application of the referenced standards shall be as specified in Section 102.8. TABLE A104.1 REFERENCED STANDARD STANDARD ACRONYM STANDARD NAME SECTIONS HEREIN REFERENCED IBC-21 International Building Code A102.1, A102.2, A102.3 2021 INTERNATIONAL PROPERTY MAINTENANCE CODE° INTERNATIONAL CODE COUNCIL APPENDIX A-1 Copyright © 2020 ICC. ALL RIGHTS RESERVED. Accessed by Jesse Szykulski (jszykulski@cityoframsey.com), (City of Minnetrista) Order Number #101073519 on Apr 19, 2021 12:45 PM (PDT) pursuant to License Agreement with ICC. No further reproduction, no further reproductions by any third party, or distribution authorized. Single user only, copying and networking prohibited. ANY UNAUTHORIZED REPRODUCTION OR DISTRIBUTION IS A VIOLATION OF THE FEDERAL COPYRIGHT ACT AND THE LICENSE AGREEMENT, AND SUBJECT TO CIVIL AND CRIMINAL PENALTIES THEREUNDER.