Laserfiche WebLink
Sec. 117-521. Business and industrial park signs. <br /> (a) Park identification signs. Industrial or business park signs shall be permitted to contain the following <br /> information:the name and address of the park,the management or the developer thereof,and the names of <br /> the individual businesses located within said park. Park identification signs shall contain no advertising <br /> material of any kind,and shall be subject to the following: <br /> (1) All industrial and business park signs shall be ground or wall signs. <br /> (2) There shall not be more than one industrial or business park sign for each point of vehicular access to <br /> an office or industrial park. <br /> (3) The gross surface area of an industrial or business park sign shall not exceed 100 square feet in gross <br /> surface area for each exposed face nor exceed an aggregate gross surface area of 200 square feet. <br /> (4) A ground industrial or business park sign shall not project higher than ten feet,as measured from base <br /> of sign or grade of the nearest adjacent roadway,whichever is higher. <br /> (b) Park member identification signs. <br /> (1) There shall not be more than one wall sign for each principal building or tenant or use within a <br /> building,except where the building abuts two or more streets,additional such signs,one oriented to <br /> each abutting street,shall be permitted. <br /> (2) There shall not be more than one ground sign for each principal building. <br /> (3) The gross surface area of a wall sign shall not exceed 15 percent of the occupant's proportionate share <br /> of the building wall to which the sign is to be affixed.A wall sign shall not project higher than the <br /> parapet line of the wall to which the sign is to be affixed. <br /> (4) The gross surface area of a ground sign shall not exceed 100 square feet for each exposed face nor <br /> exceed an aggregate gross surface area of 200 square feet. <br /> (5) A ground sign shall not project higher than ten feet,as measured from base of sign or grade of the <br /> nearest adjacent roadway,whichever is higher. <br /> (Code 1978, §9.12.10;Ord. No.94-02,2-28-1994; Ord. No.03-31,9-15-2003; Ord. No.08-07, §2,2-12-2008; Ord. <br /> No.08-25, §2,8-12-2008) <br /> Sec. 117-522. Construction specifications. <br /> (a) All signs permitted by this division in excess of 16 square feet shall be painted, lettered,or faced to the <br /> workmanship standards and best commercial practices of companies normally engaged in the business of <br /> providing commercial signs, using materials designed and marketed specifically for use on outdoor signs. <br /> (b) In addition to complying with the provisions of this division, all signs shall be constructed in accordance with <br /> the applicable provisions of the 1991 Edition of the Uniform Sign Code and State Electrical Code and as <br /> subsequently amended. <br /> (c) All signs shall be located in such a way that they maintain horizontal and vertical clearance of all electrical <br /> power lines and communication lines. <br /> (d) All signs and their supporting structures shall maintain clearance and non-interference with all surface and <br /> underground facilities and conduits for water,sewage,gas,electricity,or communications equipment or <br /> lines. In addition,the placement of all signs and their supporting structures shall not interfere with natural or <br /> artificial drainage or surface or underground water. <br /> Created: 2021-07-01 14:42:48 [EST] <br /> (Supp. No. 10,Update 2) <br /> Page 14 of 15 <br />