Agenda - Council - 05/10/2022 - Laserfiche WebLink

Home

SAFETY DATA SHEET SCENTINEL@S-20 Gas Odorant Version 1.3 Revision Date 2015-08-05 hot surfaces and sources of ignition. Storage Requirements for storage No smoking. Keep container tightly closed in a dry and well- areas and containers ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Observe label precautions. Electrical installations /working materials must comply with the technological safety standards. SECTION 8: Exposure control s/pe rsonal protection Ingredients with workplace control parameters Chevron Phillips Chemical Company LP Ingredients Basis Value Control parameters Note t-Butyl Mercaptan Manuf acturer TWA 0.5 ppm, 4 US Ingredients Basis Value Control parameters Note Engineering measures Adequate ventilation to control airborned concentrations below the exposure guidelines/limits. Consider the potential hazards of this material (see Section 2), applicable exposure limits, job activities, and other substances in the work place when designing engineering controls and selecting personal protective equipment. If engineering controls or work practices are not adequate to prevent exposure to harmful levels of this material, the personal protective equipment listed below is recommended. The user should read and understand all instructions and limitations supplied with the equipment since protection is usually provided for a limited time or under certain circumstances. Personal protective equipment Respiratory protection Wear a supplied-ai r N IOS H approved respirator unless ventilation or other engineering controls are adequate to maintain minimal oxygen content of 19.5% by volume under normal atmospheric pressure. Wear a NIOSH approved respirator that provides protection when working with this material if exposure to harmful levels of airborne material may occur, such as:. Air-Purifying Respirator for Organic Vapors. Use a positive pressure, air-supplying respirator if there is potential for uncontrolled release, exposure levels are not known, or other circumstances where air-purifying respirators may not provide adequate protection. Hand protection The suitability for a specific workplace should be discussed with the producers of the protective gloves. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough. Eye protection Eye wash bottle with pure water. Tightly fitting safety goggles. Skin and body protection Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place. Wear as appropriate:. Remove and wash MSDS Number:100000013388 5/15