Laserfiche WebLink
(E) Glare. All lighting must be arranged so as not to produce glare. All properties must be in <br />compliance with the following: <br />(1) All light sources must be controlled and equipped with lenses, louvers, shields, or prismatic <br />control devices designed to prevent off -site views of the light source. <br />(2) No flickering or flashing lights except those associated with public safety activities may be <br />permitted. <br />(3) Light sources that are integrated into a canopy must be designed to be recessed and flush <br />with the ceiling of the canopy, and equipped with a flat lens surface. <br />(4) Residential single-family and townhome uses may have wall -mounted lighting with exposed <br />light sources provided glare is not produced from off -site views. <br />(F) Compliance. Any new lighting installed after the effective date of this chapter must be in <br />compliance with the requirements of this chapter. Any lighting in existence before the effective <br />date of this chapter that does not comply with its requirements may be considered legally <br />nonconforming and may be allowed to continue in compliance with Section 140. Lighting may be <br />required to be upgraded, wholly or in part, due to a request for a site plan review, conditional use <br />permit, interim use permit, variance, or plat. <br />(G) Seasonal decorative lighting and landscape lighting are not regulated by this section. <br />