Laserfiche WebLink
Hospitals <br />One for four bcds <br />space each and an additional <br />for <br />space each employee. <br />Industrial and manufacturing <br />One space for each 1000 square feet of floor <br />space. <br />Office warehouse <br />The be <br />minimum number of spaces shall <br />industrial to the <br />officc and uscs as applied <br />corresponding floor space. <br />Medical/dental clinics <br />Three spaces per doctor/dentist. <br />Overnight lodging facilities <br />One space for each unit and one space for each <br />employee. <br />Outdoor sales and opcn <br />Merchandise displays in opcn sales sales lots and <br />in outdoor sales shall have a minimum <br />premises <br />setback of 20 feet from the front line and <br />property <br />shall one space for each 800 <br />provide parking <br />square feet of merchandise ar a; except that, for <br />auto sales lots, there shall be one space <br />parking <br />for -ach 10 autos displayed. <br />Retail shopping <br />One space for each 200 square feet of floor space <br />for retail uses under 20,000 square feet. One <br />space for each 250 square feet of floor space for <br />retail uses over 20,000 square feet. <br />Restaurants, & drinking Brewpubs, <br />Taprooms, <br />One space for each three seats or design capacity. <br />Cocktail Rooms <br />Motor vehicle, implement, and <br />equipment service and repair facilities <br />recreation <br />Three spaces for each enclosed bay and one space <br />for each full-time employee. <br />(C) Parking Maximum. For uses listed in the table above, uses may not exceed the calculated amount <br />by 20 percent without submitting a parking justification report. <br />(D) Parking spaces and drive aisles. Minimum parking space and drive aisle sizes shall be as follows: <br />Stall Width <br />Stall Depth <br />Aisle Width <br />90 degree <br />9 feet <br />18 feet <br />24 feet <br />60 degree <br />9 feet <br />17 feet <br />17 feet <br />45 degree <br />9 feet <br />19 feet <br />11 feet <br />(1) Motorcycle parking spaces may be provided. Such spaces shall be at least ten feet by five <br />feet, have a concrete surface, and signed as such. Motorcycle spaces do not count towards <br />the required parking spaces. <br />(E) Design Requirements <br />(1) All parking lot, drive aisles, driveways, loading areas, and the like shall be paved with a <br />continuous hard surface such as concrete or bituminous. Driveway -rated pavers may be used. <br />Concrete curbing must be used with a bituminous surface. <br />(2) Setbacks — Parking lots and drive aisles have the following setbacks: <br />