Laserfiche WebLink
C. The height of the top edge of the signboard shall not exceed the height of the wall from <br />which the sign projects, if attached to a single story building, or the height of the sill or <br />bottom of any second story window, if attached to a multistory building. <br />D. The distance from the building wall to the signboard shall not exceed six inches (6"). <br />E. The width of the signboard shall not exceed three (3) feet. <br />F. Limited to one (1) sign per business. Projecting sign area shall be deducted from the <br />allowable wall signage area. <br />G. Granted to ground floor commercial uses only. <br />Awning Signs <br />Awning signs are allowed in all COR sub -districts. Awning signs are allowed for ground floor uses only, <br />provided that the following standards are met: <br />A. If acting as the main business sign, it shall not exceed 24 square feet in area, and the height <br />of the lettering, numbers, or graphics shall not exceed 12 inches. <br />B. If acting as an auxiliary business sign, it shall be located on the valance only, shall not exceed <br />four (4) square feet in area, and the height of the lettering, numbers, or graphics shall not <br />exceed four inches (4"). <br />C. Limited to two such signs per business. <br />D. If acting as the main business sign, it shall not be in addition to a wall -mounted or applied <br />letter sign. <br />Sandwich Board Signs <br />Sandwich board signs are permitted within all COR sub -districts. <br />A. One (1) sandwich board sign per business is permitted in any <br />business, commercial and mixed use district and shall be located <br />within five feet (5') of the main building entrance to the business <br />it advertises. <br />B. Sandwich board signs shall be displayed only during open <br />business hours and must be removed daily. <br />C. Sandwich board signs shall be no more than a total of two feet (2') in width and three feet <br />(3') in height <br />Design Framework — The COR <br />February 28, 2012 <br />Page 37 <br />