Laserfiche WebLink
1 1. When possible, existing natural drainageways, wetlands, and vegetated soil <br /> 2 surfaces must be used to convey, store, filter, and retain stormwater runoff <br /> 3 before discharge to public waters. <br /> 4 2. Development must be planned and conducted in a manner that will minimize the <br /> 5 extent of disturbed areas, runoff velocities, erosion potential, and reduce and <br /> 6 delay runoff volumes. Disturbed areas must be stabilized and protected as soon <br /> 7 as possible and facilities or methods used to retain sediment on the site. <br /> 8 3. When development density, topographic features, and soil and vegetation <br /> 9 conditions are not sufficient to adequately handle stormwater runoff using <br /> 10 natural features and vegetation, various types of constructed facilities such as <br /> 11 diversions, settling basins, skimming devices, dikes, waterways, and ponds may <br /> 12 be used. Preference must be given to designs using surface drainage,vegetation, <br /> 13 and infiltration rather than buried pipes and manmade materials and facilities. <br /> 14 b. Specific standards: <br /> 15 1. Impervious surface coverage of lots must not exceed 25 percent of the lot area. <br /> 16 2. When constructed facilities are used for stormwater management, <br /> 17 documentation must be provided by a qualified individual that they are designed <br /> 18 and installed consistent with the field office technical guide of the local soil and <br /> 19 water conservation districts. <br /> 20 3. New constructed stormwater outfalls to public waters must provide for filtering <br /> 21 or settling of suspended solids and skimming of surface debris before discharge. <br /> 22 (5) Special provisions for commercial, industrial, public/semipublic, agricultural, forestry and <br /> 23 extractive uses and mining of metallic minerals and peat. <br /> 24 a. Standards for commercial, industrial,public, and semipublic uses. <br /> 25 1. Surface water-oriented commercial uses and industrial,public,or semipublic uses <br /> 26 with similar needs to have access to and use of public waters may be located on <br /> 27 parcels or lots with frontage on public waters. Those uses with water-oriented <br /> 28 needs must meet the following standards: <br /> 29 (i) In addition to meeting impervious coverage limits, setbacks, and other <br /> 30 zoning standards in this subdivision, the uses must be designed to <br /> 31 incorporate topographic and vegetative screening of parking areas and <br /> 32 structures; <br /> 33 (ii) Uses that require short-term watercraft mooring for patrons must <br /> 34 centralize these facilities and design them to avoid obstructions of <br /> 35 navigation and to be the minimum size necessary to meet the need; and <br /> 36 (iii) Uses that depend on patrons arriving by watercraft may use signs and <br /> 37 lighting to convey needed information to the public, subject to the <br /> 38 following general standards: <br /> 39 A. No advertising signs or supporting facilities for signs may be placed in <br /> 40 or upon public waters. Signs conveying information or safety <br /> 41 messages may be placed in or on public waters by a public authority <br /> 42 or under a permit issued by the county sheriff; <br /> 43 B. Signs may be placed, when necessary, within the shore impact zone <br /> 44 if they are designed and sized to be the minimum necessary to <br /> 45 convey needed information.They must only convey the location and <br /> 46 name of the establishment and the general types of goods or services <br /> 47 available.The signs must not contain other detailed information such <br /> 48 as product brands and prices, must not be located higher than ten <br /> 49 feet above the ground, and must not exceed 32 square feet in size. If <br /> Page 141 of 160 <br />