Laserfiche WebLink
Specification Detail: <br /> The Contractor shall conduct his/her work in conformance with the specifications set forth <br /> herein, and in accordance with safe construction practices. Additionally, the Contractor <br /> must be licensed to work in the City of Ramsey, at the time work may commence. Further: <br /> • All exposed deck edges shall be properly chamfered with a router, belt sander or <br /> other means before stain is applied. <br /> • If additional deck fasteners are needed they shall be stainless steel and of vandal <br /> resistant design, or secured with lock-tite or similar product. <br /> • 36 square posts (approx. 3" 3/4) are approximately 8' to 9' in height, and 6 are 4' <br /> foot in height. These are to be lightly scuffed with a wire brush or sandpaper in line <br /> with the grain to remove areas of lichen and to lightly prepare the surface to accept <br /> semi-transparent wood stain. Stain color to be Gun Stock brown or a tone approved <br /> by the City. <br /> • The dolphin spring-rider shall be repainted blue with a grey snout, and the 4 <br /> burnished steel balls (handles and foot pegs) may remain unpainted. <br /> • All vertical posts that are set into steel bracket 'feet' shall be inspected for missing <br /> paint. Areas with missing paint shall be appropriately scuffed and prepped with <br /> paint applied to cover over missing areas and surface rust. A rust prep product may <br /> be used also, at the discretion of the contractor. (The City does not expect these <br /> repainted areas to remain intact for a long period of time.) <br /> • Two areas *depicted below shall have the paint removed to fully reveal the <br /> galvanized metal or stainless-steel plates - or appropriately painted brown. <br /> • All non-wood surfaces shall be pressure washed with detergent or pressure washed <br /> following the application of cleanser to remove lichen and any other soil. The City <br /> shall supply the water source. <br /> REFERANCE PHOTOS <br /> 41Page <br />