Agenda - Council - 03/12/2024 - Laserfiche WebLink

Home

D. The owner shall install the cores. At the contractor's request, the owner shall install a limited number of temporary cores during construction with the appropriate cost charged to the contractor. E. The contractor must request all owner keys 24 hours in advance of using them. The contractor will be charged for any keys that are not returned to the owner when the project is completed. The charge will be equal to the cost of replacing any locks and keys relevant to the key code for those locks and keys. 2.21 KEY CABINETS A. Acceptable manufacturers and respective catalog numbers: Lund Key Control Telkee 1. PART 242 - 12 PART 243- M PART 244 - R 00-1205 AA 228-2480 WC-AWC B. Furnish 1 each model 1200 or 1205 AA key cabinet with a capacity 1.5 times the number of key sets. C. Provide one key cabinet with at least one hook for each key set, plus additional hooks for 50% expansion. D. Furnish key cabinet complete with cam lock, permanent key tags, and change key cards. E. Hardware supplier shall prepare all key change index records, tag all keys and place permanent file keys in cabinet. 2.22 FIRE DEPARTMENT ACCESS BOX A. Acceptable manufacturers, subject to compliance with specified requirements, acceptable manufacturers and products are: 1. Dama, S3 (surface-mount) 2. Dama, R3 (recessed mount) 3. Knox-Box, 3200 Series 4. Tru-Lock (recessed mount), Eau Claire, WI B. Verify manufacturer is acceptable to local Fire Department. C. Requirements: 1. Coordinate keying requirements with the authority having jurisdiction. 2. Verify surface or flush mount box with E/A. 3. Finish: Corrosion resistant. PART 3 - EXECUTION 3.1 EXAMINATION A. Prior to installation of hardware, installer shall examine door frame installation to ensure frames have been set square and plumb. Installer shall examine doors, door frames, and adjacent wall, floor, and ceiling for conditions, which would adversely affect proper operation and function of door assemblies. Do not proceed with hardware installation until such deficiencies have been corrected. 3.2 INSTALLATION A. Install all hardware in accordance with the approved hardware schedule and manufacturer's instructions for installation and adjustment. B. Set units level, plumb and true to the line and location. Adjust and reinforce the attachment substrate as necessary for proper installation and operation. C. Drill and countersink units which are not factory-prepared for anchorage fasteners. Space fasteners and anchors in accord with industry standards. Ramsey Water Treatment Plant 0871 00 - 13 DOOR HARDWARE Ramsey, Minnesota