Agenda - Planning Commission - 11/21/2024

Home

Building identity signage highlighted by architectural elements (cornice) Tenant signs incorporated into building "sign band" above the awning :III : J-t l i Wall signs are permitted within all COR sub -districts. Wall signs shall be permitted on one (1) wall, except that lots with frontage on more than one (1) street may have signage on one (1) wall per street frontage. Within the COR1, COR3, COR4 and COR5 districts, the following standards apply: A. Wall -mounted or painted signs, provided the following standards are met: 1. The sign shall be affixed to the front facade of the building, and shall project outward from the wall to which it is attached no more than six inches (6"). 2. Single Tenant Buildings. Each building shall be allowed one (1) wall sign per street frontage. Signage must be located on the street elevation. The area of the sign shall not exceed fifteen (15%) percent of the ground floor building facade area. Individual signs may not exceed. 3. Multi -Tenant Buildings. a. Each building shall be allowed wall signage on the street frontage elevation. For buildings with multiple street frontages, the allowable signage is per street frontage. Signage must be located on the street elevation. b. Each building is allowed wall signage that shall not exceed 5% of the wall area of the building facade adjacent to the street. Individual signs may not exceed 50 square feet. c. Tenant signage must be located on the tenant lease space. d. At least fifty (50%) percent of the allowed signage must be allocated to ground floor tenants and located on the ground floor. e. Signage is limited to a maximum of one (1) sign per business/tenant, except that tenants with frontage on multiple streets may be permitted to have signage on each street frontage. f. Multi -tenant buildings must have wall signs of similar design. Sign permits for Design Framework - The COR (Amendment #1) Page 36 November 27, 2012