Laserfiche WebLink
E. Acceptable materials for sandwich board signs shall include the following: metal, wood <br />synthetic materials such as a chalk board and whiteboard. Sandwich board signs shall not <br />be illuminated, nor shall they contain moving parts, or have balloons, streamers, stringers, <br />pennants or similar adornments attached to them. Sandwich board signs shall be <br />maintained in a good appearance at all times. <br />F. No sandwich board sign shall be secured, tethered or installed on traffic devices, utility <br />equipment, street furniture, street lights, or any other public fixture. <br />G. Sandwich board signs are temporary signs and shall not be counted towards the total sign <br />area of the site for permanent signage. <br />n :, wIIImwIV'lll?51 IIIw'wwwlll:�III <br />Temporary signs are allowed per Section 117-465 (Temporary signs) of the Zoning Ordinance, except as <br />noted below: <br />A. Freestanding temporary signs shall only be allowed in the COR2 and COR3 Districts. <br />B. In all other COR districts, temporary signs shall be limited to temporary sandwich board signs or <br />temporary wall signage, without interchangeable letters. <br />C. Real estate and leasing signs shall be exempt from temporary and permanent sign regulations, <br />provided that these signs do not exceed thirty-two (32) square feet. <br />Off -site signs are prohibited except for wayfinding and community signage specifically allowed by the <br />Design Framework. <br />Design Framework - The COR (Amendment #1) Page 40 <br />November 27, 2012 <br />