Laserfiche WebLink
(b) In addition to complying with the provisions of this division, all signs shall be constructed in accordance with <br />the applicable provisions of the 1991 Edition of the Uniform Sign Code and State Electrical Code and as <br />subsequently amended. <br />(c) All signs shall be located in such a way that they maintain horizontal and vertical clearance of all electrical <br />power lines and communication lines. <br />(d) All signs and their supporting structures shall maintain clearance and non-interference with all surface and <br />underground facilities and conduits for water, sewage, gas, electricity, or communications equipment or <br />lines. In addition, the placement of all signs and their supporting structures shall not interfere with natural or <br />artificial drainage or surface or underground water. <br />(e) All signs, except those attached flat against the wall of a building, shall be constructed to withstand minimum <br />wind loads as follows: <br />(1) Solid signs: 30 pounds per square foot per face of the sign. <br />(2) Open signs: 36 pounds per square foot of the total face area of the letters and other sign surfaces, or <br />ten pounds per square foot of the gross surface area of the sign, whichever is greater. <br />(Code 1978, § 9.12.12; Ord. No. 94-02, 2-28-1994; Ord. No. 03-31, 9-15-2003; Ord. No. 08-07, § 2, 2-12-2008; Ord. <br />No. 08-25, § 21 8-12-2008) <br />Secs. 117-523-117-554. Reserved. <br />(Supp. No. 13, Update 2) <br />Created: 2024-07-25 15: 21 :45 [ EST] <br />Page 15 of 15 <br />