11/18/98 - Laserfiche WebLink

Home

CASE REQUEST FOR SITE PLAN APPROVAL; CASE OF SHARP AND ASSOCIATES By: Sylvia Frolik, Zoning Administrator Background: The Business Park 95 Architectural Review Board has receiVed a request for site plan review and approval from Sharp & Associates. The plan proposes to construct an office/warehouse facility on Lot 2, Block 1, Business Park 95 5th Addition. The following items are enclosed: · Site location map · Site plan · City Staff review letter dated October 30, 1998 Observations: The building will have two accesses onto 140th Avenue N.W. The property is 1.74 acres in Size and the covenants restricts building coverage to 35% and impervious surface to 85% of the lot. The building is proposed to be 20,832 square feet in size; this converts to a building coverage of 27.5%, which is in compliance with the covenants. The covenants restricts impervious surface to 85% of the lot area; the proposed impervious surface is 79%. The structure meets all of the setback requirements. It will be constructed entirely of concrete masonry units in accordance with the covenants. All maneuvering areas on the site will be surfaced with bituminous and fmished with B-612 concrete curbing. The three waste storage enclosures will be constructed of painted concrete block with cedar gates. The Business Park covenants requires at least 10% of the lot area to be landscaped; the site plan proposes a green space area equal to 21% of the lot area. In accordance with City Code, a 20 foot wide landscape area is provide adjacent to 140th Avenue. The Landscape Plan shows 20 trees; the City Council approved the Plan with the addition of two more trees, one on the east and one on the west to intens!fy screening activity at the overhead doors. The location of mechanical equipment is not noted on the building elevations. The covenants requires all mechanical equipment to be screened l~om public streets, incorporated into the architectural design of the building, and be constructed of materials compatible with those of the building. Equipment located on a roof top may be painted to be compatible with the building, if expressly allowed by the Board. Ail exterior lighting will be subject to the approval of the City Engineer.