Laserfiche WebLink
<br />.12.069 <br /> <br /> <br />SHod. 1. Snapping CeBtcr Signs. In accordance 'Kith Ramsey City Code <br />Section 9.03.06 (Site Plnn Revie;w), Subdivision 1 (Req'..1ired Site Plun/Bailding <br />Design Information, item 'e' (Signs), the de'v'eloper shall submit a sign plan for <br />approvn.L drn'A'l1 to scale ',';"lth ele'.'ations, at the time application is made for site <br />plan appro';al. The sign plan shall include but not be limited to the follo'Nillg <br />infoffilation: number of signs, type of signs, sign sizes, type of c.onstruction <br />matarloJs, sign messages, and proposed sign locations. <br /> <br />Eland E J Employment Type Distrietslndustrial Zoning Districts (E-l. E- <br />n <br /> <br />!h-SubdiYision 1. Wall, Canopy or Marquee Sign. Total sign area may not <br />exceed fifteen (15) percent of the front building fayade. Sign height shall not <br />exceed the tope of the parapet wall or, if no parapet wall, sign height shall not <br />exceed the height of the eaves. A wall, canopy or marquee sign may be located <br />on the outermost wall of any principal building but shall not project more than <br />sixteen (16) inches from the wall to which the sign is to be affixed. Where a <br />principal building is devoted to two (2) or more permitted uses, the operator of <br />each such use may install a wall sign upon hislher proportionate share of the <br />building wall to which the sign is to be affixed. The maximum gross surface <br />area of each such wall sign shall be determined by calculating the proportionate <br />share of the area of the building wall, including doors and windows to which the <br />sign is to be affixed and applying such proportion to the total permitted wall <br />sign aggregate gross surface area for the building. The gross surface area of a <br />wall sign may be increased by ten percent (10%) if such wall sign: <br /> <br />La. Consists only of individual, outlined alphabetic, <br />numeric, and/or symbolic characters without background except provided by the <br />building surface to which the sign is to be affixed; and <br /> <br />2. b. Any illumination, if any, is achieved through shielded <br />illumination, shielded silhouette lighting, or shielded spot lighting but not any <br />lighting where the light source is visible or exposed on the face or sides of the <br />characters. <br /> <br />Subd. 2.~ Ground Signs. There shall not be more than one (1) ground <br />sign for each parcel. The gross surface area of a ground sign shall not exceed <br />one hundred (100) square feet for each exposed face nor exceed an aggregate <br />gross surface area of two hundred (200) square feet. <br /> <br />c. Signs in Parking Lots. Signs in parkinlI lots are limited to one sign per <br />entrance and/or exit limited to four square feet for each exposed face. and may <br />not be more than 5 feet in height. Anv silIns required bv Federal ADA statutes <br /> <br />55 <br />