Laserfiche WebLink
include but not be limited to the following information: number of signs, type of signs, sign <br />sizes, type of construction materials, sign messages, and proposed sign locations: <br />9.12.09 E-1 and E-2 Employment Type Districts <br />Subdivision 1. Wall, Canopy or Marquee Sign. Total sign area may not exceed <br />fifteen (15) percent of the front building facade. Sign height shall not exceed the top of the <br />parapet wall or, if no parapet wall, sign height shall not exceed the height of the eaves. A wall, <br />canopy or marquee sign may be located on the outermost wall of any principal building but shall <br />not project more than sixteen (16) inches from the wall to which the sign is to be affixed. Where <br />a principal building is devoted to two (2) or more permitted uses, the operator of each such use <br />may install a wall sign upon his/her proportionate share of the building wall to which the sign is <br />to be affixed. The maximum gross surface area of each such wall sign shall be determined by <br />calculating the proportionate share of the area of the building wall, including doors and windows <br />to which the sign is to be affixed and applying such proportion to the total permitted wall sign <br />aggregate- gross surface area for the building. The gross surface area of a wall sign may be <br />increased by ten percent (10%) if such wall sign: <br />a. Consists only of individual; outlined alphabetic, .numeric, and/or symbolic <br />characters without background except provided by the building surface to <br />which the sign is to be affixed; and <br />b. Any illumination, if any, is achieved through shielded illumination, shielded <br />silhouette lighting, or shielded spot lighting but not any lighting where the <br />light source is visible or exposed on the face or sides of the characters. <br />Subd. 2. Ground Signs. There shall not be more than one (1) ground sign <br />for each parcel. -The gross surface area of a ground sign shall not exceed one hundred (100) <br />square feet for each exposed face nor exceed an aggregate gross surface area of two hundred <br />(200) square feet. <br />Subd. 3. Directional Signs <br />a. Directional or instructional signs are permitted in accordance with §9.12.03 <br />Subd. 9. <br />b. Parking lot directional signs designating parking area entrances and exits are <br />limited to one (1) sign for each entrance and/or exit and shall not exceed <br />four (4) square feet for each exposed face. Parking lot directional signs <br />shall not project higher than five (5) feet in height, as measured from the <br />established grade of the parking area to which such signs are accessory. <br />c. Parking lot instructional signs designating the conditions of use or <br />identification of parking areas shall not exceed eight (8) square -feet and <br />shall not project higher than ten (10) feet in height for wall signs and seven <br />-324- <br />