Agenda - Council - 10/14/2008 - Laserfiche WebLink

Home

Exhibit C CITY OF RAMSEY DEVELOPMENT PERMIT TAG MACHINE On October 14, 2008, Site Plan approval was granted by the City of Ramsey, ("City") to Tag Machine, whose address is 7101 143`d Ave NW, Ramsey, MN 55303 ("Permittee"), to construct an 11,208 square -foot manufacturing facility ("Structure") on the property which is legally described as follows: Lot 1, Block 1, Gateway North Industrial Park Plat 2 (Subject to Easement as Shown on Plat) the ("Site") This approval is issued pursuant to §9.03,08 of the City Code. The conditions of this approval are as follows: 1. STRUCTURE. All building plans must be prepared and certified by a registered engineer or architect. 2. STATE BUILDING CODE COMPLIANCE. The Structure shall be constructed in accordance with the requirements of the State Building Code. ' 3. SITE PLAN COMPLIANCE. The Structure shall be constructed on the Site as shown on the Site Plan submittal prepared by Lampert Architects dated August 29, 2008. 4. REQUIRED IMPROVEMENTS. The Permittee shall construct and install the following site improvements on the Site in accordance with the specifications and location as shown on the Site Plan. The Required Improvements are as follows; a. Site grading in accordance with. the Grading and Drainage Plan prepared by H,akanson,Anderson Associates, Inc. dated August 28, 2008. b, Installation of concrete or bituminous driveways and parking lot. c, Installation of B-6/12 continuous concrete curbing around the perimeter of all concrete and/or bituminous surfaces. d, Establishment of turf in areas disturbed during construction and in accordance with the Site Plan. e, Installation of landscaping materials in accordance with the Landscape Plan prepared by Lampert Architects dated August 29, 2008. f Irrigation metering and backflow devices shall be approved as part of the Utility Plan, and installed accordingly. —258—