Agenda - Council - 07/13/2010 - Laserfiche WebLink

Home

Municode Page 8 of 11 Seo- 117-520 - E-1 and E-2 Emolovment Districts. Sec 117-521 -Business and industrial Dark signs. Sec. 117-522. - ConsWction specifications Secs. 117-523-117-554. -Reserved. Sec. 117-517. -District regulations. In addition to those signs permitted or required in all districts as described in secticns 117-463 and 117- 465, the following signs are permitted in each specific district and shall be regulated as to size, location and character according to the requirements herein set forth. (Code 1978, § 9.12.06; Ord. No. 94-02, 2.28.1994; Ortl. No. 08.07, § 2, 2.12-2008; Ord. No. 08.25, § 2, 8.12.2008) Sec. 117-518. -Residential type districts. Aarea identification signs. One sign per vehicular access to a development, not to exceed 32 square feet in area is permitted. (b) Temporary signs. Temporary signs are permitted in accordance with section 117-465. (c) Home occupation signs. Home occupations signs may be permitted in accordance with section 117-351. (Code 1978, § 9.12.07; Ord. No. 03.31, 9-15-2003; Ord. No. 08-07, § 2, 2-12-2008; Ord. No. OS-25, § 2, 8.12-2008) Sec. 117-519. -Business type districts. (a) Business use signs. (Wall, canopy ormarquee sign. Total sign area may not exceed 15 percent of the front building facade. Businesses in multitenant buildings shall be allowed the proportionate share of the total wall sign area. The total wall signage permitted may be distributed on any other building facade. Sign height shall not exceed the top of the parapet wall or, if no parapet wall, sign height shall not exceed the height of the eaves. A wall, canopy or marquee sign may be located on the outermost wall of any principal building but shall not project more than 16 inches from the wall to which the sign is to be affixed. The gross surface area of a wall, canopy or marquee sign may be increased by ten percent if such wall sign: a. I Consists only of individual, outlined alphabetic, numeric and/or symbolic characters without background except j that provided by the building surface to which the sign is to be affixed; and j b. I Illumination, if any, is achieved through shielded illumination, shielded silhouette lighting, or shielded spot lighting but not any lighting where the light source is visible or exposed on the face or sides of the characters. G2round sign. There shall not be more than one ground sign for each parcel. The gross surface area of a ground sign shall not exceed 100 square feet for each exposed face nor exceed an aggregate gross surface area of 200 square feet. Service bayidentification signs. Service bay identificaticn signs providing direction or instruction to persons using the facility and containing no advertising material of any kind shall be subject to the following: a All service bay identification signs shall be wall signs. b. There shall not be more than one service bay identification sign for each service bay located on the parcel. c. A service bay identification sign may be located on the outermost wall. of any principal building adjacent to a service bay entrance. d. I A service bay identification sign shall not project higher than the parapet line of the wall to which the sign is to be affixed. F4uel pump island identification sign. Fuel pump island identification signs indicating the type of service offered; the price of gasoline; and other relevant information, within reason, pertaining to the facility; or direction to persons using the facility shall be subject to the following: The gross surface area of a service island identification sign http://library.municode.com/print.aspx?clientID=14286&HTMRequest=http%3 a%2f%2#li... 5/24/2010