Laserfiche WebLink
ENVIRONMENTAL _ SYSTEMS, Inc. <br />A Division of Royal Enterprises America <br />ecoStorm Stormwater Treatment Specifications <br />Structural, hydrodynamic, gross particulate separation technology <br />Part 1.00 - General <br />1.01 Description <br />protect <br />A. Work included: <br />The contractor, and /or manufacturer selected by the contractor and approved by the engineer, shall <br />furnish all labor, commodity materials, equipment, and incidentals required and shall install the <br />structural stormwater treatment system and appurtenances in accordance with the drawings and <br />these specifications. <br />1.02 Quality Control Inspection <br />A. The structural stormwater treatment system shall be dry- fitted in the manufacturer's yard prior to <br />shipment to the project site. The unit, when dry- fitted, shall have all component connections pre - <br />drilled and anchored. Section joints shall be clearly marked for the contractor to properly install and <br />align the unit in the field. <br />B. The quality of materials, the process of manufacture, and the finished sections shall be subject to <br />inspection by the engineer. Such inspection may be made at the place of manufacture, on the work <br />site after delivery, or at both locations. Sections rejected after delivery to the site shall be marked for <br />identification and shall be removed from the site at once. Any section that has been damaged after <br />delivery may be rejected and, if already installed, shall be acceptably repaired (if permitted) or <br />removed and replaced, entirely at the contractor's expense. <br />C. All sections shall be inspected for general appearance, dimensions, soundness, etc. The surface <br />shall be dense, close- textured, and free of excess bug holes, cracks, roughness, and exposure of <br />reinforcement. <br />D. Imperfections may be repaired, subject to the acceptance of the engineer. Repairs shall be carefully <br />inspected before final acceptance. <br />1.03 Submittals <br />A. Shop drawings: <br />The contractor shall submit to the engineer six sets of shop drawings and the corresponding hydraulic <br />sizing and calibration for the specific site for which the stormwater treatment system has been <br />designed prior to release of bid documents. <br />TODAY by <br />building forTOMORROW <br />www.royalenterprises.net • 651- 462 -2130 • 800 - 817 -3240 <br />3.09 <br />