Laserfiche WebLink
RAMSEY FIRE DEPARTMENT <br /> BODY SPECIFICATIONS <br /> <br />75" Body Side Height <br />BODYSIDE HEIGHT <br /> <br />Standard hose bed compartment, 75" body side height. <br /> <br />Two Hosebed Dividers in Hosebed <br /> <br />HOSE BED DIVIDERS <br /> <br />There shall be an adjustable hose divider installed in the hose bed. All hose dividers shall be <br />fabricated of 1/4" thick aluminum plate. The dividers shall have a double sided reinforcement <br />where they are attached to the adjustable slide rail. There shall be a radius on the top rear of each <br />divider to prevent injury. Hose payout shall be unobstructed by the dividers. <br /> <br />Floor Tile in Compartments <br />FLOOR TILE <br /> <br />Modular floor tile is to be installed on the bottom of all compartments. <br /> <br />Floor Tile for Shelves <br />FLOOR TILE ON SHELVES <br /> <br />Modular floor tile is to be installed on the bottom of shelves. <br /> <br />Adjustable Shelf Unistrut in All compartments <br />SHELVING UNISTRUT <br /> <br />All compartments will have tracks installed for installation of adjustable shelves and trays. <br /> <br />Compartment Shelving - Aluminum <br />COMPARTMENT SHELVING <br /> <br />All shelves shall be fabricated of. 190 thick aluminum with two flanges formed up, one front and <br />one rear. <br /> <br />Shelf locations shall be adjustable: <br />4 - in the full height compartment <br />1 - in the over the wheel compartment <br /> <br />Page 21 of 33 <br /> <br /> <br />