Laserfiche WebLink
RAMSEY FIRE DEPARTMENT <br /> BODY SPECIFICATIONS <br /> <br />The coatings shall not contain lead, cadminum or arsenic. The polyiscoyanate component shall <br />consist of only aliphatic isocyanates, with no portion being aromatic isocyanate in character. The <br />solvents used in all components and products shall not contain ethylene glycol mono-ethyl ethers <br />or their acetates (commercially recognized as cellosolves), nor shall they contain any chlorinated <br />hydrocarbons. The products shall have no adverse effects on the health or nor present any <br />unusual hazard to personnel when used according to manufacturers recommendations for <br />handling and proper protective safety equipment, and for its intended use. <br /> <br />The coating system, as supplied and recommended for application, shall meet all applicable <br />federal, state and local laws and regulations now in force or at any time during the courses of the <br />bid. <br /> <br />The manufacturer shall supply for each product and component of the system, a properly <br />complete OSHA "Material Data Safety Sheet". <br /> <br />The following documents of the issue in effect on the date of the invitation to quote, form a part <br />of this document to the extent specified herein: <br /> <br /> Federal Standards: Number 14lA and 14lB paint, vamish, lacquer and related material: <br />methods of inspection, sampling, and testing. <br /> <br /> Military Standard: MIL-C 83486B Coating, Urethane, Aliphatic Isocyanate, for <br />Aerospace applications. <br /> <br /> Industry Methods and Standards: ASTM Method of Analysis (American Society for <br />testing and Materials). BMS 10-72A (Boeing Material Specifications). <br /> <br />The chassis wheels shall be finish coated and there shall be a silver edge painted on the chassis <br />rims about 1/4" deep and the full circumference of the wheel beginning from the tire edge and in. <br /> <br />The entire underside, inside and out of the body shall receive the primer coats and the finish <br />coats. The entire apparatus body, will be painted in a down draft type paint booth to reduce dust, <br />dirt or impurities in the finish paint. <br /> <br />The painted surface shall have a finish with no runs, sage, crater, pinholes or other defects. <br /> <br />The painted apparatus shall have a PPG pint performance guarantee. The GUARANTEE shall <br />include peeling or delamination of the top coat and or other layers of paint, cracking or checking, <br />loss of gloss caused by cracking, checking, and hazing. There shall be a warranty certificate <br />furnished to the original purchaser. <br /> <br />Page 33 of 33 <br /> <br /> <br />