Laserfiche WebLink
Ramsy Fire <br /> <br /> CHASSIS SPECIFICATIONS <br />Interior Paint, Job Color <br /> <br />The interior metal surfaces of the cab shall be finish painted the same color as the primary <br />exterior color. <br /> <br />Gray Interior Trim & Seats w/Gray Floor Mat <br />All of the cab interior vinyl surfaces, including the seats, shall be gray in color. <br /> <br />The pebble grain, non-slip vinyl covered, foam backed, sound deadening, multi-layer insulating <br />floor mat shall be gray or equivalent. <br /> <br />***CLIMATE CONTROL OPTIONS*** <br /> <br />INTERIOR CAB CLIMATE CONTROL <br /> <br />AIR CONDITIONING <br /> <br />Front Overhead Heater, Standard <br /> <br />A 57,600 btu front overhead heater and defroster shall be provided. The heater shall be located <br />above the windshield between the padded sunvisors. The heater shall contain temperature and <br />blower controls. <br /> <br />***CAB EXTERIOR*** <br /> <br />CAB EXTERIOR <br /> <br />CAB TILT ACTUATION <br /> <br />The entire cab shall tilt 45 degrees to allow for easy maintenance of the engine and transmission. <br /> <br />The cab tilt actuation shall be with an electric over hydraulic lift pump with a control box on a <br />pennant for safe visual operation. The lift system shall have an ignition interlock and red lock <br />down indicator lamp which shall illuminate when holding "down" switch to indicate safe road <br />operation. Two cab tilt cylinders shall be provided with velocity fuses in each cylinder port. The <br />cab pivots shall be 1.90" ball and be anchored to frame brackets with 1.25" dia. studs. <br /> <br />Two spring loaded hydraulic hold down hooks outboard of the frame shall be installed for <br />holding the cab securely to the frame. <br /> <br />EXTERIOR CAB ASSIST HANDLES <br /> <br />Page 16 of 19 <br /> <br /> <br />