Laserfiche WebLink
zoater bodies, and estimate the discharge impact on the quality of receiving waters. If the <br />project involves on-site sewage systems, discuss the suitability of site conditions for such <br />systems. <br />If wastes will be discharged into a publicly owned treatment facility, identid5d the facility, <br />describe any pretreatment provisions and discuss the facility's ability to handle the <br />volume and composition of zoastes, identidqying any improvements necessary. <br />Does not apply <br /> <br />Observe the following points of guidance in an A UAR: <br /> <br />-only domestic zoastezoater should be considered in an A UAR - industrial wastewater <br />would be coming from industrial uses that are excluded from review through an A UAR <br />process; <br />-zoastewater flows should be estimated by land use subareas of the A UAR area; the basis <br />of flow estimates should be explained; <br />-the major sewer system features should be shozon on a map and the expected flows <br />should be identified; <br />-if not explained under item 6, the expected staging of the sezoer system construction <br />should be described; and <br />-the relationship of the sewer system extension to the RGU' s comprehensive sezoer plan <br />and (for metro area A UARs) to Metropolitan Council regional systems plans, including <br />MUSA expansions, should be discussed. <br /> <br />Not applicable. <br /> <br />19. <br /> <br />Geological hazards and soil conditions <br /> <br />a. Approximate depth (in feet): to ground water: 4 ft. Min. 10 ft. Avg. <br /> To bedrock: 120 ft. Min. 160 ft. Avg. <br /> <br />Describe any of the following geolog& site hazards to groundwater and also identiJiy them on the <br />site map: sinkholes, shallozo limestone formations or karst conditions. Describe measures to <br />avoid or minimize environmental problems due to any of these hazards. <br /> <br />c. Describe the soils on the site, giving NRCS (SCS) classification, if known. Discuss soil <br /> granularihy and potential for groundwater contamination from wastes or chemicals <br /> spread or spilled onto the soils. Discuss any mitigation measures to prevent such <br /> contamination. <br /> <br />For an A UAR, a map should also be included to show any groundwater hazards <br />identified. A standard soils map for the area should be included. <br /> <br />Not applicable. <br /> <br />20. <br /> <br />Solid wastes; hazardous wastes; storage tanks <br /> <br />a. Describe hypes, amounts and compositions of solid or hazardous wastes, including soild <br /> animal manure, sludge and ash, produced during construction and operation. Identify <br /> methods and location or disposal. For projects generating municipal solid waste, indicate <br /> if there is a source separation plan; describe how the project will be modified for rec~ycling. <br /> <br />RAMSEY TH 10 CORRIOOR AUAR 16 <br /> <br /> <br />