Laserfiche WebLink
170.055 <br /> <br />b. Maximum Sign Area: Three hundred (300) square feet <br /> per facing and not to exceed two (2) facings. Double- <br /> faced signs shall be attached back to back. <br />c. Minimum Setback from'Street Right-of-Way Lines: Five <br /> (5) feet. <br />d. Sign Structure Specifications: The structure shall be <br /> be all metal. The metal shall be either painted or <br /> treated to prevent deterioration. Lack of proper main- <br /> tenance shall be cause for revocation of the special <br /> use permit. <br /> <br />· DISTRICI' REGULATIONS <br /> <br />In addition to those signs permitted in all districts, the following <br />signs are permitted in each specific district and shall be regulated <br />as to size, location and character according to the requirements herein <br />set forth. <br /> <br />I?O.OSSA PJ.iSIDFiNTI~ TYPE DISTRICTS <br /> <br /> 1. Nameplate Signs: One (1) sign for each dwelling unit, <br />not greater than two (2) square feet in area, indicating the name and/or <br />address of the occupant. <br /> <br /> 2. InstitUtional and Recreational Signs: One (1) sign or <br />-bulletin board per street frontage for a church, a public institutional <br /> use or a recreational use in the residential districts. Such sign or <br /> bulletin board shall not exceed twenty-four' (24) square feet in area <br /> nor shall it be placed closer than ten (10) feet to any street right-of- <br /> way line. k <br /> <br /> 3. Area Identification Signs: One (1) sign per development, <br /> not to exceed twenty-four (24) square feet in area. <br /> <br />4. Temporary Signs: Refer to Sect[on 170.053P. <br /> <br /> <br />